US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

D6-Flufenacet OA

Item number689016
FormulaC11H6D6FNO3
Molecular weight231,25 g/mol
Quantity 1X10MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
D6-Flufenacet OA

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

D6-Flufenacet OA

D6-Flufenacet OA

689016

1X10MG

Please log in.

D6-Flufenacet OA solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

D6-Flufenacet OA solution

689109

1X1ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 05.02.2025
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:D6-Flufenacet OA
Catalog No.:689016
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
Acute Tox. 3 H301 Toxic if swallowed.
Carc. 2 H351 Suspected of causing cancer.
Eye Irrit. 2 H319 Causes serious eye irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects.
Label elements
PictogramGHS06 skull
skull
GHS08 silhouete
silhouete
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
· Signal word Danger
· Hazard statements
H301 Toxic if swallowed.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer.
H412 Harmful to aquatic life with long lasting effects.
· Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS· 3.1 Chemical characterisation: Substances
· CAS No. Description
· Identification number(s) None
· RTECS: -
FormulaC11H6D6FNO3
Molecular Weight (g/mol)231.25
CAS-No.
FIRST AID MEASURES· 4.1 Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation:
Supply fresh air and call a doctor.
In case of unconsciousness place patient in recovery position for transport.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
Rinse mouth. Do not induce vomiting.
Call for a doctor immediately.
· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available
FIRE-FIGHTING MEASURES· 5.1 Extinguishing media
· Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.
· 5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
· 5.3 Advice for firefighters
· Protective equipment: Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.
· 6.2 Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:
Dispose of contaminated material as waste according to item 13.
· 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end uses no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace: Not required.
· Additional information: Lists used were valid at the time of SDS preparation.
· 8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
· Respiratory protection: Not required.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374.
· Material of gloves Fluorocarbon rubber (Viton)
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses
PHYSICAL AND CHEMICAL PROPERTIES· 9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Solid
Colour: White
· Odour: Odourless
· Odour threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/freezing point: Not determined.
Initial boiling point and boiling range: Not determined.
· Flash point: Not applicable.
· Flammability (solid, gas): Not determined.
· Ignition temperature: Not determined
· Decomposition temperature: Not determined.
· Auto-ignition temperature: Not determined.
· Explosive properties: Not determined.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure: Not applicable.
· Density: Not determined.
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water: Not determined.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· 9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY· 10.1 Reactivity Stable under normal conditions.
· 10.2 Chemical stability Stable under normal conditions.
· Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
· 10.3 Possibility of hazardous reactions No dangerous reactions known.
· 10.4 Conditions to avoid
Heat.
Sources of ignition
· 10.5 Incompatible materials: Strong oxidizing agents.
· 10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION· 11.1 Information on toxicological effects
· Acute toxicity
Toxic if swallowed.
· Primary irritant effect:
· Skin corrosion/irritation Based on available data, the classification criteria are not met.
· Serious eye damage/irritation
Causes serious eye irritation.
· Respiratory or skin sensitisation
May cause an allergic skin reaction.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
Carc. 2
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity
Suspected of causing cancer.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION· 12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
· 12.2 Persistence and degradability No further relevant information available.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· Ecotoxicological effects:
· Remark: Harmful to fish
· Additional ecological information:
· General notes:
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Harmful to aquatic organisms
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS· 13.1 Waste treatment methods
· Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packaging:
· Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION· 14.1 UN-Number
· ADR, IMDG, IATA UN2811
· ADR 2811 TOXIC SOLID, ORGANIC, N.O.S. (Flufenacet
oxalate)
· IMDG, IATA TOXIC SOLID, ORGANIC, N.O.S. (Flufenacet oxalate)
· 14.3 Transport hazard class(es)
· ADR, IMDG, IATA
· Class 6.1 Toxic substances.
· Label 6.1
· 14.4 Packing group
· ADR, IMDG, IATA III
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Warning: Toxic substances.
· Danger code (Kemler): 60
· EMS Number: F-A,S-A
· 14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· Transport/Additional information:
· ADR
· Limited quantities (LQ) 5 kg
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 1000 g
· Transport category 2
· Tunnel restriction code E
· UN "Model Regulation": U N 2 8 1 1 T O X I C S O L I D , O R G A N I C , N . O . S .
(FLUFENACET OXALATE), 6.1, III
REGULATORY INFORMATION· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I Substance is not listed.
· Seveso category H2 ACUTE TOXIC
· Qualifying quantity (tonnes) for the application of lower-tier requirements 50 t
· Qualifying quantity (tonnes) for the application of upper-tier requirements 200 t
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!