Hotline:
+49 (0) 34291 / 33 72 36
contact@hpc-standards.com

US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!

Filter

  • Package Size
  •   1 Unit
  •   2 Units
  •   3 Units
  •   4 Units
  •   7 Units
  •   8 Units
  •   11 Units
  •   100 Units
  •   600 Units
  • Volume
  •   1 mg
  •   2 mg
  •   2.5 mg
  •   2.61 mg
  •   5 mg
  •   10 mg
  •   20 mg
  •   25 mg
  •   50 mg
  •   100 mg
  •   200 mg
  •   250 mg
  •   261 mg
  •   500 mg
  •   1000 mg
  •   5000 mg
  •   0.5 ml
  •   1 ml
  •   5 ml
  •   10 ml
  •   100 ml
  •   500 ml
  •   0.18 g
  •   0.2 g
  •   0.25 g
  •   0.3 g
  •   0.35 g
  •   0.4 g
  •   0.5 g
  •   0.53 g
  •   0.6 g
  •   0.7 g
  •   0.73 g
  •   0.8 g
  •   0.83 g
  •   1 g
  •   1.05 g
  •   1.07 g
  •   1.1 g
  •   1.2 g
  •   1.3 g
  •   1.6 g
  •   2 g
  •   5 g
  •   6.5 g
  •   7.5 g
  •   250 g
  •   100 pcs

7H-Perfluoro heptanoic acid

Item number681534
CAS1546-95-8
FormulaC7H2F12O2
Molecular weight346,07 g/mol
Quantity 1X100MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
7H-Perfluoro heptanoic acid

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

7H-Perfluoro heptanoic acid

7H-Perfluoro heptanoic acid

681534
1546-95-8

1X100MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 22.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:7H-Perfluoro heptanoic acid
Catalog No.:681534
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATIONClassification (According to EU Regulation 1272/2008)
Skin Corrosion (Category 1B)
H314
Label elements
PictogramGHS05 acid
acid
GHS07 exclam
exclam
GHS Hazard Statements
H314
H318
Causes severe skin burns and eye damage.
Causes serious eye damage.
Danger
GHS Precautionary Statements
Signal Word
P261
P264
P280
P303/P361/P353
Avoid breathing dust/fume/gas/mist/vapours/spray
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305/P351/P338
P310
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Component
7H-Perfluoro heptanoic acid
Classification
Skin Corr. 1A; H314
Concentration
<= 100 %
FormulaC7H2F12O2
Molecular Weight (g/mol)346.07
CAS-No.1546-95-8
FIRST AID MEASURES4.1 Description of First Aid Measures
General Advice
If medical attention is required, show this safety data sheet to the doctor.
If Inhaled
If inhaled, move person to fresh air. If not breathing, give artificial respiration and consult a physician.
In Case of Skin Contact
Wash affected area with soap and water. Consult a physician if any exposure symptoms are observed.
In Case of Eye Contact
Immediately rinse eyes with plenty of water for at least 15 minutes. Consult a physician.
If Swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Do NOT induce vomiting unless
advised to do so by a physician or Poison Control Center. Seek medical attention.

4.2 Most Important Symptoms and Effects, Both Acute and Delayed
The most important known symptoms and effects are described in the labeling (see section 2.2) and/or section 11.
4.3 Indication of any Immediate Medical Attention and Special Treatment Needed
No data available.
FIRE-FIGHTING MEASURES5.3 Advice for Firefighters
5.1 Extinguishing Media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special Hazards Arising from the Substance or Mixture
Carbon oxides, Sulfur oxides, Hydrogen fluoride
Wear self contained breathing apparatus for fire fighting if necessary.

5.4 Further Information
No data available.
ACCIDENTAL RELEASE MEASURESPersonal precautions
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Method and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for
disposal.
HANDLING AND STORAGEPrecautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place.
Keep in a dry place.
Storage conditions:-20°C Freezer, Under inert atmosphere
7.3 Specific End Uses
For scientific research and development only. Not for use in humans or animals.
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control Parameters
Contains no components with established occupational exposure limits.
8.2 Exposure Controls
Appropriate Engineering Controls
A laboratory fumehood or other appropriate form of local exhaust ventilation should be used to avoid exposure.
Personal Protective Equipment
All recommendations below are advisory in nature and a risk assessment should be performed by the employer/end
user prior to use of this product. The type of protective equipment must be selected based on the amount and
concentration of the dangerous material being used in the workplace.
Eye/Face Protection
Safety goggles or face shield. All equipment should have been tested and approved under appropriate standards, such
as NIOSH (US), CSA (Canada), or EN 166 (EU).
Skin Protection
Gloves should be used when handling this material.
Body Protection
Fire resistant (Nomex) lab coat or coveralls.
Respiratory Protection
Recommended respirators are NIOSH-approved N100 or CEN-approved FFP3 particulate respirators. These are to be
only used as a backup to local exhaust ventilation or other engineering controls. If the respirator is the only means of
protection, a full-face supplied air respirator must be used.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on Basic Physical and Chemical Properties
A) Appearance White to LightBrown Solid
B) Odour No data available
C) Odour Threshold No data available
D) pH No data available
E) Melting Point/Freezing Point >71°C (dec.)
F) Initial Boiling Point/Boiling Range No data available
G) Flash point No data available
H) Evaporation Rate No data available
I) Flammability (Solid/Gas) No data available
J) Upper/Lower Flammability/Explosive Limits No data available
K) Vapour Pressure No data available
L) Vapour Density No data available
M) Relative Density No data available
N) Solubility Acetone (Slightly), Chloroform (Slightly), DMSO (Slightly), Methanol
O) Partition Coefficient: n-octanol/water No data available
P) Auto-Ignition Temperature No data available
Q) Decomposition Temperature No data available
R) Viscosity No data available
S) Explosive Properties No data available
T) Oxidizing Properties No data available
9.2 Other Information no data available
STABILITY AND REACTIVITY10.1 Reactivity
10.2 Chemical Stability
10.3 Possibility of Hazardous Reactions
10.4 Conditions to Avoid
10.5 Incompatible Materials
10.6 Hazardous Decomposition Products
No data available.
Stable under recommended storage conditions.
No data available.
No data available.
Strong oxidizing agents.
In the event of fire: See section 5. Other decomposition products: No data available.
TOXICOLOGICAL INFORMATION11.1 Information on Toxicological Effects
A) Acute Toxicity
Oral LD50: No data available. Inhalation LC50: No data available.
Dermal LD50: No data available.
B) Skin Corrosion/Irritation
C) Serious Eye Damage/Irritation
D) Respiratory or Skin Sensitization
No data available
Corrosive - causes skin and eye burns. May also cause respiratory tract damage.
No data available
E) Germ Cell Mutagenicity
F) Carcinogenicity
G) Reproductive Toxicity/Teratogenicity
H) Single Target Organ Toxicity - Single Exposure
I) Single Target Organ Toxicity - Repeated Exposure
J) Aspiration Hazard
K) Potential Health Effects and Routes of Exposure
Inhalation
No data available
No data available
No data available
No data available
No data available
No data available
May be harmful if inhaled. Material is extremely destructive to the mucous membranes and respiratory tract.
May be harmful if swallowed.
May be harmful if absorbed through skin. Causes skin burns.
Causes severe eye burns and possible permanent eye damage.
Ingestion
Skin
Eyes
The most important known symptoms and effects are described in the labeling (see section 2.2) and/or section 11.
L) Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties of this material have not been
thoroughly investigated.
M) Additional Information
Not available.
ECOLOGICAL INFORMATION12.1 Toxicity
No data available.
12.2 Persistance and Degradability
No data available.
12.3 Bioaccumulative Potential
No data available.
12.4 Mobility in Soil
No data available.
12.5 Results of PBT and vPvB Assessment
No data available.
12.6 Other Adverse Effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste Treatment Methods
A) Product
Product may be burned in an incinerator equipped with afterburner and scrubber. Excess and expired materials are to
be offered to a licensed hazardous material disposal company. Ensure that all Federal and Local regulations regarding
the disposal and destruction of this material are followed.
B) Contaminated Packaging
Dispose of as above.
C) Other Considerations
Product is not to be disposed of in sanitary sewers, storm sewers, or landfills.
TRANSPORT INFORMATION14.1 UN Number
DOT (US): 1760 IATA: 1760 IMDG: 1760
14.2 UN Proper Shipping Name
DOT (US)/IATA:
IMDG/ARD/RID:
Corrosive solid, acidic, organic, n.o.s.
CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
14.3 Transport Hazard Class(es)
DOT (US):8 IATA:8 IMDG: 8 ADR/RID: 8
14.4 Packing Group
DOT (US): III IATA: III IMDG: III ADR/RID: III
14.5 Environmental Hazards
DOT (US): None IATA: None IMDG: None ADR/RID: None
14.6 Special Precautions for User
None
REGULATORY INFORMATIONThis safety data sheet complies with the requirements of EU RegulationEC No. 1907/2006.
15.1 Safety, Health and Environmental Regulations/Legislation Specific for the Substance or Mixture
ECHA Status:
This product is not registered with the EU ECHA.
15.2 Chemical Safety Assessment
No data available
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!