US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

Bis(2-ethylhexyl) adipate

Item number676490
CAS103-23-1
FormulaC22H42O4
Molecular weight370,57 g/mol
Quantity 1X250MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Bis(2-ethylhexyl) adipate

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Bis(2-ethylhexyl) adipate

Bis(2-ethylhexyl) adipate

676490
103-23-1

1X250MG

Please log in.

Bis(2-ethylhexyl) adipate solution
Concentration: 1000 µg/ml
Solvent: Acetone

Bis(2-ethylhexyl) adipate solution

689772
103-23-1

1X5ML

Please log in.

D4-Bis(2-ethylhexyl) adipate solution
Concentration: 100 µg/ml
Solvent: Cyclohexane

D4-Bis(2-ethylhexyl) adipate solution

681608

1X1ML

On request

D8-Bis(2-ethylhexyl) adipate solution
Concentration: 100 µg/ml
Solvent: Cyclohexane

D8-Bis(2-ethylhexyl) adipate solution

692499
1214718-98-5

1X1ML

On request

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 22.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Bis(2-ethylhexyl) adipate
Catalog No.:676490
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
Pictogram
2.2 Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
2.3 Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Synonyms : Adipic acid di(2-ethylhexyl) ester
DOA
Formula : C22H42O4
Molecular Weight : 370,57 g/mol
CAS-No. : 103-23-1
EC-No. : 203-090-1
No components need to be disclosed according to the applicable regulations
FormulaC22H42O4
Molecular Weight (g/mol)370.57
CAS-No.103-23-1
FIRST AID MEASURES4.1 Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
4.3 Indication of any immediate medical attention and special treatment needed
no data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
5.4 Further information
no data available
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Avoid breathing vapours, mist or gas.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13
HANDLING AND STORAGE7.1 Precautions for safe handling
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands. Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection not required. For nuisance exposures use type OV/AG (US) or type ABEK
(EU EN 14387) respirator cartridges. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: colourless
b) Odour no data available c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing
point
Melting point/range: < -70 °C - lit.
f) Initial boiling point and
boiling range
175 °C at 3 hPa - lit.
g) Flash point 196 °C - closed cup
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower
flammability or
explosive limits
no data available
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 0,925 g/cm3 at 20 °C
n) Water solubility 0,00078 g/l at 22 °C - slightly soluble
o) Partition coefficient: noctanol/
water
log Pow: 8,94 at 25 °C
p) Auto-ignition
temperature
377 °C at 1.013,25 hPa
q) Decomposition
temperature
no data available
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
9.2 Other safety information
no data available
STABILITY AND REACTIVITY10.1 Reactivity
no data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
no data available
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - rat - female - 24.600 mg/kg
(OECD Test Guideline 401)
LD50 Oral - rat - male - 45.000 mg/kg
(OECD Test Guideline 401)
LC50 Inhalation - rat - male and female - 4 h - > 5,7 mg/l
(OECD Test Guideline 403)
LD50 Dermal - rabbit - 14.800 mg/kg
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
Ames test
S. typhimurium
Result: negative
mouse - male
Result: negative
Carcinogenicity
This product is or contains a component that is not classifiable as to its carcinogenicity based on its IARC,
ACGIH, NTP, or EPA classification.
IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (Bis(2-ethylhexyl) adipate)
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
Repeated dose toxicity - rat - male and female - Oral - No observed adverse effect level - 200 mg/kg
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
ECOLOGICAL INFORMATION12.1 Toxicity
Toxicity to fish static test LC0 - Oncorhynchus mykiss (rainbow trout) - > 0,78 mg/l - 96 h Toxicity to daphnia and
other aquatic
invertebrates
Immobilization EC50 - Daphnia magna (Water flea) - > 500 mg/l - 48 h
(OECD Test Guideline 202)
Toxicity to algae static test EC50 - Desmodesmus subspicatus (Scenedesmus subspicatus) - >
500 mg/l - 72 h
Toxicity to bacteria EC50 - Sludge Treatment - > 350 mg/l - 3 h
12.2 Persistence and degradability
Biodegradability aerobic - Exposure time 28 d
Result: 90 - 100 % - Readily biodegradable.
(OECD Test Guideline 301F)
12.3 Bioaccumulative potential
Bioaccumulation Lepomis macrochirus - 28 d
- 250 &#956;g/l
Bioconcentration factor (BCF): 27
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
no data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
no data available
REGULATORY INFORMATIONThis safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available 15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!