US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

Narasin

Item number681568
CAS55134-13-9
FormulaC43H72O11
Molecular weight765,03 g/mol
Quantity 1X10MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Narasin

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Narasin

Narasin

681568
55134-13-9

1X10MG

Please log in.

Narasin solution
Concentration: 1000 µg/ml
Solvent: Acetonitrile

Narasin solution

692136
55134-13-9

1X1ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 26.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Narasin
Catalog No.:681568
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation EC No 1272 2008
Acute toxicity Oral Category 2 H300
Label elements
PictogramGHS06 skull
skull
Label elements
Labelling according Regulation (EC) No 1272/2008
Signal Word Danger
Hazard statement(s)
H300 Fatal if swallowed.
Precautionary statement(s)
P301 + P330 + P331 +P310
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Immediately call a POISON CENTER/ doctor.
Supplemental Hazard Statements none

Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTSComposition/information on ingredients
3.1 Substances
Molecular weight : 765 g/mol
CAS-No. : 55134-13-9

Narasin Classification Acute Tox. 2; H300 Concentration <= 100 %

CAS-No. 55134-13-9
FormulaC43H72O11
Molecular Weight (g/mol)765.03
CAS-No.55134-13-9
FIRST AID MEASURES: First aid measures
4.1 Description of first-aid measures
General advice
Show this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air.
In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower.
In case of eye contact
After eye contact: rinse out with plenty of water. Remove contact lenses.
If swallowed
If swallowed: give water to drink (two glasses at most). Seek medical advice immediately.
In exceptional cases only, if medical care is not available within one hour, induce vomiting
(only in persons who are wide awake and fully conscious), administer activated charcoal
(20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURESFirefighting measures
5.1 Extinguishing media
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by
keeping a safe distance or by wearing suitable protective clothing.
5.4 Further information
Prevent fire extinguishing water from contaminating surface water or the ground water
system.
ACCIDENTAL RELEASE MEASURES Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact.
Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures,
consult an expert.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area.
Avoid generation of dusts
6.4 Reference to other sections
For disposal see section 13
HANDLING AND STORAGE Handling and storage
7.1 Precautions for safe handling
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible
only to qualified or authorized persons.
Storage class
Storage class (TRGS 510): 6.1B: Non-combustible, acute toxic Cat. 1 and 2 / very toxic
hazardous materials
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION: Exposure controls/personal protection
8.1 Control parameters
Ingredients with workplace control parameters
8.2 Exposure controls
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Skin protection
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).

Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L

Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L

Body Protection
protective clothing

Respiratory protection required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Recommended Filter type: Filter type P3
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.

Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIESInformation on basic physical and chemical properties
a) Physical state solid
b) Color No data available
c) Odor No data available
d) Melting
point/freezing point
No data available
e) Initial boiling point
and boiling range
No data available
f) Flammability (solid,
gas)
No data available
g) Upper/lower
flammability or
explosive limits
No data available
h) Flash point No data available
i) Autoignition
temperature
No data available
j) Decomposition
temperature
No data available
k) pH No data available
l) Viscosity Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
m) Water solubility No data available
n) Partition coefficient:
n-octanol/water
No data available
o) Vapor pressure No data available
p) Density No data available
Relative density No data available
q) Relative vapor
density
No data available
r) Particle
characteristics
No data available
s) Explosive properties Not classified as explosive.
t) Oxidizing properties none
9.2 Other safety information
No data available
STABILITY AND REACTIVITY: Stability and reactivity
10.1 Reactivity
No data available
10.2 Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
no information available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
In the event of fire: see section section 5
TOXICOLOGICAL INFORMATIONToxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 18,5 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity).
Behavioral:Food intake (animal).
Diarrhea
LD50 Oral - 5,1 mg/kg
Acute toxicity estimate Oral - 18,5 mg/kg
(Calculation method)
Inhalation: No data available
Dermal: No data available
Skin corrosion/irritation
Remarks: No data available
Serious eye damage/eye irritation
Remarks: No data available
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
No data available
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
11.2 Additional Information
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated.
ECOLOGICAL INFORMATION Ecological information
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Endocrine disrupting properties
No data available
12.7 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS Disposal considerations
13.1 Waste treatment methods
No data available
TRANSPORT INFORMATIONTransport information
14.1 UN number
ADR/RID: 2811 IMDG: 2811 IATA: 2811
14.2 UN proper shipping name
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (Narasin)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. (Narasin)
IATA: Toxic solid, organic, n.o.s. (Narasin)
14.3 Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
REGULATORY INFORMATIONRegulatory information
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
National legislation
Seveso III: Directive 2012/18/EU of the European : ACUTE TOXIC
Parliament and of the Council on the control of
major-accident hazards involving dangerous substances.
Other regulations
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or
stricter national regulations where applicable.
Take note of Dir 94/33/EC on the protection of young people at work.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!