Products

Myrcene

Item number	684140
CAS	123-35-3
Formula	C10H16
Molecular weight	136,23 g/mol
Quantity	1X100MG
storage conditions	-20 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS

Price

Please log in.

Product Variations:

Product		Catalog No./ CAS No.	Quantity	Price
Myrcene		684140 123-35-3	1X100MG	Please log in.

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 21.11.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	Myrcene
Catalog No.:	684140
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com
Emergency telephone number	HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours.
HAZARDS IDENTIFICATION	Flammable liquids, (Category 3) H226: Flammable liquid and vapor. Skin irritation, (Category 2) H315: Causes skin irritation. Eye irritation, (Category 2) H319: Causes serious eye irritation. Aspiration hazard, (Category 1) H304: May be fatal if swallowed and enters airways. Short-term (acute) aquatic hazard, (Category 1) H400: Very toxic to aquatic life. Long-term (chronic) aquatic hazard, (Category 1) H410: Very toxic to aquatic life with long lasting effects.
Label elements
Pictogram	flamme flamme GHS07 exclam exclam GHS08 silhouete silhouete GHS09 Aquatic-pollut-red Aquatic-pollut-red
	Labeling according Regulation (EC) No 1272/2008 Signal Word Danger Hazard Statements H226 Flammable liquid and vapor. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. H410 Very toxic to aquatic life with long lasting effects. Precautionary Statements P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 Avoid release to the environment. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P331 Do NOT induce vomiting. Supplemental Hazard Statements none 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Ecological information: The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Toxicological information: The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS	Synonyms : 7-Methyl-3-methylene-1,6-octadiene CAS-No. 123-35-3 EC-No. 204-622-5 Classification Flam. Liq. 3; Skin Irrit. 2; Eye Irrit. 2; Asp. Tox. 1; Aquatic Acute 1; Aquatic Chronic 1; H226, H315, H319, H304, H400, H410 Concentration <= 100 % For the full text of the H-Statements mentioned in this Section, see Section 16.
Formula	C10H16
Molecular Weight (g/mol)	136.23
CAS-No.	123-35-3
FIRST AID MEASURES	4.1 Description of first-aid measures General advice Show this material safety data sheet to the doctor in attendance. If inhaled After inhalation: fresh air. In case of skin contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. In case of eye contact After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. If swallowed After swallowing: caution if victim vomits. Risk of aspiration! Keep airways free. Pulmonary failure possible after aspiration of vomit. Call a physician immediately. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labeling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available
FIRE-FIGHTING MEASURES	5.1 Extinguishing media Suitable extinguishing media Carbon dioxide (CO2) Foam Dry powder Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given. 5.2 Special hazards arising from the substance or mixture Carbon oxides Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures. Development of hazardous combustion gases or vapours possible in the event of fire. 5.3 Advice for firefighters Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. 5.4 Further information Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
ACCIDENTAL RELEASE MEASURES	6.1 Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. 6.2 Environmental precautions Do not let product enter drains. Risk of explosion. 6.3 Methods and materials for containment and cleaning up Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material. Dispose of properly. Clean up affected area. 6.4 Reference to other sections For disposal see section 13
HANDLING AND STORAGE	7.1 Precautions for safe handling Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge. Hygiene measures Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Storage conditions Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Storage stability Recommended storage temperature -20 °C Store under inert gas. Air sensitive. Storage class Storage class (TRGS 510): 3: Flammable liquids 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION	SECTION 8: Exposure controls/personal protection 8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves Full contact Material: Nitrile rubber Minimum layer thickness: 0,4 mm Break through time: 480 min Material tested: Gloves Size M This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 30 min Material tested: Gloves size L Body Protection Flame retardant antistatic protective clothing. Respiratory protection required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. Control of environmental exposure Do not let product enter drains. Risk of explosion.
PHYSICAL AND CHEMICAL PROPERTIES	9.1 Information on basic physical and chemical properties a) Physical state liquid b) Color No data available c) Odor No data available d) Melting point/freezing point Melting point/range: < -10 °C e) Initial boiling point and boiling range 167 °C - lit. f) Flammability (solid, gas) No data available g) Upper/lower flammability or explosive limits No data available h) Flash point 44 °C - closed cup i) Autoignition temperature 255 °C j) Decomposition No data available temperature k) pH No data available l) Viscosity Viscosity, kinematic: No data available Viscosity, dynamic: No data available m) Water solubility 0,00506 g/l at 20 °C n) Partition coefficient: n-octanol/water log Pow: 4,82 at 30 °C o) Vapor pressure 9 hPa at 20 °C p) Density 0,791 g/mL at 25 °C - lit. Relative density 0,793 at 20 °C - OECD Test Guideline 109 q) Relative vapor density 4,7 - (Air = 1.0) r) Particle characteristics No data available s) Explosive properties No data available t) Oxidizing properties none 9.2 Other safety information Relative vapor density 4,7 - (Air = 1.0)
STABILITY AND REACTIVITY	10.1 Reactivity Vapor/air-mixtures are explosive at intense warming. 10.2 Chemical stability The product is chemically stable under standard ambient conditions (room temperature) . 10.3 Possibility of hazardous reactions Violent reactions possible with: Strong oxidizing agents Strong acids Strong bases 10.4 Conditions to avoid Heating. 10.5 Incompatible materials No data available 10.6 Hazardous decomposition products In the event of fire: see section 5
TOXICOLOGICAL INFORMATION	11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - male - > 3.380 mg/kg Remarks: (ECHA) Inhalation: No data available LD50 Dermal - Rabbit - > 5.000 mg/kg (OECD Test Guideline 402) Skin corrosion/irritation Skin - in vitro test Result: Irritating to skin. (EPISKIN Human Skin Model Test) Serious eye damage/eye irritation Eyes - Rabbit Result: Irritating to eyes. (OECD Test Guideline 405) Respiratory or skin sensitization Local lymph node assay (LLNA) - Mouse Result: Not a skin sensitizer. (OECD Test Guideline 429) Germ cell mutagenicity No data available Test Type: Ames test Test system: S. typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative Test Type: In vivo micronucleus test Species: Mouse Application Route: Oral Method: Mutagenicity (micronucleus test) Result: negative Carcinogenicity No data available Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard May be fatal if swallowed and enters airways. 11.2 Additional Information Endocrine disrupting properties Product: Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: RG5365000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
ECOLOGICAL INFORMATION	12.1 Toxicity Toxicity to daphnia and other aquatic invertebrates EC50 - Daphnia magna (Water flea) - 1,47 mg/l - 48 h (OECD Test Guideline 202) Toxicity to algae ErC50 - Pseudokirchneriella subcapitata (green algae) - 0,32 mg/l - 72 h (OECD Test Guideline 201) 12.2 Persistence and degradability Biodegradability aerobic - Exposure time 28 d Result: 76 % - Readily biodegradable. (OECD Test Guideline 301D) 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Endocrine disrupting properties Product: Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. 12.7 Other adverse effects No data available
DISPOSAL CONSIDERATIONS	13.1 Waste treatment methods No data available
TRANSPORT INFORMATION	14.1 UN number ADR/RID: 2319 IMDG: 2319 IATA: 2319 14.2 UN proper shipping name ADR/RID: TERPENE HYDROCARBONS, N.O.S. IMDG: TERPENE HYDROCARBONS, N.O.S. IATA: Terpene hydrocarbons, n.o.s. 14.3 Transport hazard class(es) ADR/RID: 3 IMDG: 3 IATA: 3 14.4 Packaging group ADR/RID: III IMDG: III IATA: III 14.5 Environmental hazards ADR/RID: yes IMDG Marine pollutant: yes IATA: no 14.6 Special precautions for user Tunnel restriction code : (D/E) Further information : No data available
REGULATORY INFORMATION	15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. P5c FLAMMABLE LIQUIDS E1 ENVIRONMENTAL HAZARDS Other regulations Take note of Dir 94/33/EC on the protection of young people at work. 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!