New user? / Forgot your password?
0 Item | 0,00 €
Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!
2-Methoxypropyl acetate
| Item number | 688737 |
| CAS | 70657-70-4 |
| Formula | C6H12O3 |
| Molecular weight | 132,16 g/mol |
| Quantity | 1X100MG |
| storage conditions | 20 °C |
| CoA / MSDS | Retrieve CoA Retrieve MSDS |
Price | Please log in. |
Product Variations:
Product | Catalog No./ CAS No. | Quantity | Price | |
|---|---|---|---|---|
 | 688737 | 1X100MG | Please log in. |
| Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 15.01.2025 |
| IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
| Product name: | 2-Methoxypropyl acetate |
| Catalog No.: | 688737 |
| Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
| Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
| Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
| HAZARDS IDENTIFICATION | · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 |
| Label elements | |
| Pictogram | flamme flamme GHS07 exclam exclam GHS08 silhouete silhouete |
| · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the CLP regulation. · Signal word Danger · Hazard statements H226 Flammable liquid and vapour. H360D May damage the unborn child. H335 May cause respiratory irritation. · Precautionary statements P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P241 Use explosion-proof [electrical/ventilating/lighting] equipment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. · Additional information: Restricted to professional users. · 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. | |
| COMPOSITION/INFORMATION ON INGREDIENTS | · 3.1 Chemical characterisation: Substances · CAS No. Description 70657-70-4 2-Methoxypropyl acetate · Identification number(s) None · EC number: 274-724-2 · Index number: 607-251-00-0 · RTECS: AI8967450 |
| Formula | C6H12O3 |
| Molecular Weight (g/mol) | 132.16 |
| CAS-No. | 70657-70-4 |
| FIRST AID MEASURES | · 4.1 Description of first aid measures · After inhalation: Supply fresh air; consult doctor in case of complaints. · After skin contact: Immediately wash with water and soap and rinse thoroughly. · After eye contact: Rinse opened eye for several minutes under running water. · After swallowing: Rinse mouth. Do not induce vomiting. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. · 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. |
| FIRE-FIGHTING MEASURES | · 5.1 Extinguishing media · Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. · 5.2 Special hazards arising from the substance or mixture Formation of toxic gases is possible during heating or in case of fire. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained respiratory protective device. |
| ACCIDENTAL RELEASE MEASURES | · 6.1 Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away. · 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose of contaminated material as waste according to item 13. Ensure adequate ventilation. · 6.4 Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. |
| HANDLING AND STORAGE | · 7.1 Precautions for safe handling Store in cool, dry place in tightly closed receptacles. · Information about fire - and explosion protection: Keep ignition sources away - Do not smoke. Protect against electrostatic charges. · 7.2 Conditions for safe storage, including any incompatibilities · Storage: · Requirements to be met by storerooms and receptacles: Please refer to the manufacturers certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA. Keep container in a well-ventilated place. Keep away from sources of ignition and heat. · Information about storage in one common storage facility: Store away from foodstuffs. · Further information about storage conditions: Keep container tightly sealed. · 7.3 Specific end use(s) No further relevant information available. |
| EXPOSURE CONTROLS/PERSONAL PROTECTION | · Additional information about design of technical facilities: No further data; see item 7. · 8.1 Control parameters · Ingredients with limit values that require monitoring at the workplace: Not required. · Additional information: Lists used were valid at the time of SDS preparation. · 8.2 Exposure controls · Personal protective equipment: · General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. · Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. · Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374 · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles |
| PHYSICAL AND CHEMICAL PROPERTIES | · 9.1 Information on basic physical and chemical properties · General Information · Appearance: Form: Liquid Colour: Colourless · Odour: Mild · Odour threshold: Not determined. · pH-value: Not determined. · Change in condition Melting point/freezing point: <-20 °C Initial boiling point and boiling range: 148-151 °C · Flash point: 48 °C · Flammability (solid, gas): Not determined. · Ignition temperature: 410 °C · Decomposition temperature: Not determined. · Auto-ignition temperature: Not determined. · Explosive properties: Product is not explosive. However, formation of explosive air/ vapour mixtures is possible. · Explosion limits: Lower: Not determined. Upper: Not determined. · Vapour pressure at 20 °C: 2.9 hPa · Density at 20 °C: 0.97 g/cm³ · Relative density Not determined. · Vapour density Not determined. · Evaporation rate Not determined. · Solubility in / Miscibility with Chloroform, Methanol · water at 20 °C: 400 g/l · Partition coefficient: n-octanol/water: Not determined. · Viscosity: Dynamic: Not determined. Kinematic: Not determined. · 9.2 Other information No further relevant information available. |
| STABILITY AND REACTIVITY | · 10.1 Reactivity Stable under normal conditions. No further relevant information available. · 10.2 Chemical stability Stable under normal conditions. · Thermal decomposition / conditions to be avoided: Formation of toxic gases is possible during heating or in case of fire. · 10.3 Possibility of hazardous reactions May form flammable/explosive vapour-air mixture. · 10.4 Conditions to avoid Sources of ignition Heat. · 10.5 Incompatible materials: Strong oxidizing agents. · 10.6 Hazardous decomposition products: Formation of toxic gases is possible during heating or in case of fire. |
| TOXICOLOGICAL INFORMATION | · 11.1 Information on toxicological effects · Acute toxicity Based on available data, the classification criteria are not met. · Primary irritant effect: · Skin corrosion/irritation Based on available data, the classification criteria are not met. · Serious eye damage/irritation Based on available data, the classification criteria are not met. · Respiratory or skin sensitisation Based on available data, the classification criteria are not met. · CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) Repr. 1B · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity May damage the unborn child. · STOT-single exposure May cause respiratory irritation. · STOT-repeated exposure Based on available data, the classification criteria are not met. · Aspiration hazard Based on available data, the classification criteria are not met. |
| ECOLOGICAL INFORMATION | · 12.1 Toxicity · Aquatic toxicity: No further relevant information available. · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · Additional ecological information: · General notes: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product to reach ground water, water course or sewage system. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. · 12.6 Other adverse effects No further relevant information available |
| DISPOSAL CONSIDERATIONS | · 13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · European waste catalogue Waste disposal key numbers from EWC have to be assigned depending on origin and processing. · Uncleaned packaging: · Recommendation: Dispose of in accordance with national regulations. |
| TRANSPORT INFORMATION | · 14.1 UN-Number · ADR, IMDG, IATA UN1993 · ADR 1993 FLAMMABLE LIQUID, N.O.S. (2-Methoxypropyl acetate) · IMDG, IATA FLAMMABLE LIQUID, N.O.S. (2-Methoxypropyl acetate) · 14.3 Transport hazard class(es) · ADR, IMDG, IATA · Class 3 Flammable liquids. · Label 3 · 14.4 Packing group · ADR, IMDG, IATA III · 14.5 Environmental hazards: Not applicable. · 14.6 Special precautions for user Warning: Flammable liquids. · Danger code (Kemler): 30 EMS Number: F-E,S-D · Stowage Category A · 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. · Transport/Additional information: · ADR · Limited quantities (LQ) 5L · Excepted quantities (EQ) Code: E1 Maximum net quantity per inner packaging: 30 ml Maximum net quantity per outer packaging: 1000 ml · Transport category 3 · Tunnel restriction code D/E · UN "Model Regulation": U N 1 9 9 3 F L A M M A B L E L I Q U I D , N . O . S . ( 2 - METHOXYPROPYL ACETATE), 3, III |
| REGULATORY INFORMATION | · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Directive 2012/18/EU · Named dangerous substances - ANNEX I Substance is not listed. · Seveso category P5c FLAMMABLE LIQUIDS · Qualifying quantity (tonnes) for the application of lower-tier requirements 5.000 t · Qualifying quantity (tonnes) for the application of upper-tier requirements 50.000 t · REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3, 30, 40 · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. |
| OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |