US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

tert-Butyl acetate

Item number679636
CAS540-88-5
FormulaC6H12O2
Molecular weight116,16 g/mol
Quantity 1X1ML
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
tert-Butyl acetate

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Butyl acetate

Butyl acetate

681845
123-86-4

1X5ML

Please log in.

tert-Butyl acetate

tert-Butyl acetate

679636
540-88-5

1X1ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 27.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:tert-Butyl acetate
Catalog No.:679636
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 2), H225 Classification according to EU Directives 67/548/EEC or 1999/45/EC
F Highly flammable R11
R66
Label elements
Pictogramflamme
flamme
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram Signal word Danger
Hazard statement(s)
H225 Highly flammable liquid and vapour Precautionary statement(s)
P210 Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
Supplemental Hazard information (EU)
EUH066 Repeated exposure may cause skin dryness or cracking.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Formula : C6H12O2
Molecular weight : 116,16 g/mol
CAS-No. : 540-88-5
EC-No. : 208-760-7
Index-No. : 607-026-00-7
No components need to be disclosed according to the applicable regulations
FormulaC6H12O2
Molecular Weight (g/mol)116.16
CAS-No.540-88-5
FIRST AID MEASURES4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13).
6.4 Reference to other sections
For disposal see section 13
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): Flammable liquids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands. Body Protection
impervious clothing, Flame retardant antistatic protective clothing., The type of protective
equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: colourless
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing
point
Melting point/range: < -57,99 °C
f) Initial boiling point and
boiling range
97 - 98 °C - lit.
g) Flash point 4 °C - closed cup
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower
flammability or
explosive limits
Lower explosion limit: 1,5 - 1,7 %(V)
k) Vapour pressure 56 hPa at 20 °C
l) Vapour density 4,65
m) Relative density 0,866 g/cm3 at 20 °C
n) Water solubility ca.6,7 g/l at 23 °C - OECD Test Guideline 105 - soluble
o) Partition coefficient: noctanol/
water
log Pow: 1,64 at 21,7 °C
p) Auto-ignition
temperature
589 °C at 1.015 hPa
q) Decomposition
temperature
No data available
r) Viscosity < 1 mm2/s at 25 °C -
s) Explosive properties No data available t) Oxidizing properties No data available
9.2 Other safety information
Surface tension 64 mN/m at 20 °C
Relative vapour density 4,65
STABILITY AND REACTIVITY10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Heat, flames and sparks.
10.5 Incompatible materials
Oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - male - 4.100 mg/kg
Inhalation: No data available
LD50 Dermal - Rabbit - male and female - > 2.000 mg/kg
Skin corrosion/irritation
Skin - Rabbit
Result: No skin irritation - 4 h
Serious eye damage/eye irritation
Eyes - Rabbit
Result: No eye irritation - 72 h
Respiratory or skin sensitisation
- Guinea pig
Did not cause sensitisation on laboratory animals.
(Buehler Test)
Germ cell mutagenicity
No data available
reverse mutation assay
S. typhimurium
Result: negative
Mutagenicity (micronucleus test)
Rat - male and female
Result: negative
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
Repeated dose toxicity - Mouse - male and female - inhalation (vapour)
RTECS: AF7400000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated
ECOLOGICAL INFORMATION12.1 Toxicity
Toxicity to fish semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - 240 mg/l - 96 h
(OECD Test Guideline 203)
Toxicity to daphnia and
other aquatic
invertebrates
static test EC50 - Daphnia magna (Water flea) - 350 mg/l - 48 h
(OECD Test Guideline 202)
12.2 Persistence and degradability
Biodegradability aerobic - Exposure time 28 d
Result: 50 % - Inherently biodegradable.
(OECD Test Guideline 301D)
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 1123 IMDG: 1123 IATA: 1123 14.2 UN proper shipping name
ADR/RID: BUTYL ACETATES
IMDG: BUTYL ACETATES
IATA: Butyl acetates
14.3 Transport hazard class(es)
ADR/RID: 3 IMDG: 3 IATA: 3
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
REGULATORY INFORMATIONThis safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!