Hotline:
+49 (0) 34291 / 33 72 36
contact@hpc-standards.com

US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!

Filter

  • Package Size
  •   1 Unit
  •   2 Units
  •   3 Units
  •   4 Units
  •   7 Units
  •   8 Units
  •   11 Units
  •   100 Units
  •   600 Units
  • Volume
  •   1 mg
  •   2 mg
  •   2.5 mg
  •   2.61 mg
  •   5 mg
  •   10 mg
  •   20 mg
  •   25 mg
  •   50 mg
  •   100 mg
  •   200 mg
  •   250 mg
  •   261 mg
  •   500 mg
  •   1000 mg
  •   5000 mg
  •   0.5 ml
  •   1 ml
  •   5 ml
  •   10 ml
  •   100 ml
  •   500 ml
  •   0.18 g
  •   0.2 g
  •   0.25 g
  •   0.3 g
  •   0.35 g
  •   0.4 g
  •   0.5 g
  •   0.53 g
  •   0.6 g
  •   0.7 g
  •   0.73 g
  •   0.8 g
  •   0.83 g
  •   1 g
  •   1.05 g
  •   1.07 g
  •   1.1 g
  •   1.2 g
  •   1.3 g
  •   1.6 g
  •   2 g
  •   5 g
  •   6.5 g
  •   7.5 g
  •   250 g
  •   100 pcs

Dodemorph

Item number681060
CAS1593-77-7
FormulaC18H35NO
Molecular weight281,48 g/mol
Quantity 1X250MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Dodemorph

Price

Please log in.

Part of Product groups:

 

 

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Dodemorph

Dodemorph

681060
1593-77-7

1X250MG

Please log in.

Dodemorph solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

Dodemorph solution

688919
1593-77-7

1X5ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 26.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Dodemorph
Catalog No.:681060
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
GHS08 health hazard
Repr. 2 H361d Suspected of damaging the unborn child.
STOT RE 2 H373 May cause damage to the liver through prolonged or repeated exposure.
GHS05 corrosion
Skin Corr. 1C H314 Causes severe skin burns and eye damage.
GHS09 environment
Aquatic Acute 1 H400 Very toxic to aquatic life.
Aquatic Chronic 1 H410 Very toxic to aquatic life with long lasting effects.
GHS07
Skin Sens. 1A H317 May cause an allergic skin reaction.
Label elements
PictogramGHS05 acid
acid
GHS07 exclam
exclam
GHS08 silhouete
silhouete
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
· Hazard pictograms
GHS05 GHS07 GHS08 GHS09
· Signal word Danger
· Hazard statements
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H361d Suspected of damaging the unborn child.
H373 May cause damage to the liver through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
· Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Additional information:
EUH071 Corrosive to the respiratory tract.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Chemical characterisation: Substances
· CAS No. Description
1593-77-7 dodemorph (ISO)
· Identification number(s) None
· EC number: 216-474-9
· Index number: 613-057-00-7
· RTECS: QE0550000
FormulaC18H35NO
Molecular Weight (g/mol)281.48
CAS-No.1593-77-7
FIRST AID MEASURES4.1 Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may occur even after several hours; therefore medical observation for at least 48
hours after the accident is recommended.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact:
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: Rinse mouth. Do not induce vomiting.
4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
FIRE-FIGHTING MEASURES5.1 Extinguishing media
· Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.
5.2 Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
5.3 Advice for firefighters
· Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.
6.2 Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
6.3 Methods and material for containment and cleaning up:
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
HANDLING AND STORAGE7.1 Precautions for safe handling
Ensure good ventilation/extraction at the workplace.
Remove dust thoroughly.
Store in cool, dry place in tightly closed receptacles.
Open and handle receptacle with care.
· Information about fire - and explosion protection: Keep respiratory protective device available.
7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Store in a cool location.
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions: Keep container tightly sealed.
7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace: Not required.
· Additional information: Lists used were valid at the time of SDS preparation.
8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374
Protective gloves
· Material of gloves Butyl rubber, BR
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection:
Tightly sealed goggles
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Crystalline
Colour: Colourless
· Odour: Odourless
· Odour threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/Melting range: 71 °C
Boiling point/Boiling range: 315 °C
· Flash point: 100 °C
· Flammability (solid, gaseous): Not determined.
· Ignition temperature: Not determined
· Decomposition temperature: Not determined.
· Self-igniting: Not determined.
· Danger of explosion: Not determined.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure: Not applicable.
· Density: Not determined.
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water at 20 °C: <0.01 g/l
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY10.1 Reactivity Stable under normal conditions.
10.2 Chemical stability Stable under normal conditions.
· Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
10.3 Possibility of hazardous reactions No dangerous reactions known.
10.4 Conditions to avoid Heat.
10.5 Incompatible materials: Strong oxidizing agents.
10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
· Acute toxicity Based on available data, the classification criteria are not met.
· LD/LC50 values relevant for classification:
Oral LD50 2645 mg/kg (rat)
Dermal LD50 2000 mg/kg (rat)
Inhalative LC50/4 h 5 mg/l (rat)
· Primary irritant effect:
· Skin corrosion/irritation
Causes severe skin burns and eye damage.
· Serious eye damage/irritation
Causes severe skin burns and eye damage.
· Respiratory or skin sensitisation
May cause an allergic skin reaction.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
Repr. 2
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity
Suspected of damaging the unborn child.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure
May cause damage to the liver through prolonged or repeated exposure.
· Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
12.2 Persistence and degradability No further relevant information available.
12.3 Bioaccumulative potential No further relevant information available.
12.4 Mobility in soil No further relevant information available.
· Ecotoxicological effects:
· Remark: Very toxic for fish
· Additional ecological information:
· General notes:
Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach sewage water or drainage ditch undiluted or unneutralised.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Very toxic for aquatic organisms
12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
· Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packaging:
· Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION14.1 UN-Number
· ADR, IMDG, IATA UN3261
· ADR 3261 CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
(dodemorph (ISO)), ENVIRONMENTALLY HAZARDOUS
· IMDG CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
(dodemorph (ISO)), MARINE POLLUTANT
· IATA CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
(dodemorph (ISO))
14.3 Transport hazard class(es)
· ADR, IMDG
· Class 8 Corrosive substances.
· Label 8
· IATA
· Class 8 Corrosive substances.
· Label 8
14.4 Packing group
· ADR, IMDG, IATA III
14.5 Environmental hazards: Environmentally hazardous substance, solid; Marine
Pollutant
· Marine pollutant: Symbol (fish and tree)
· Special marking (ADR): Symbol (fish and tree)
14.6 Special precautions for user Warning: Corrosive substances.
· Danger code (Kemler): 80
· EMS Number: F-A,S-B
· Segregation groups Acids
· Stowage Category B
14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· Transport/Additional information:
· ADR
· Limited quantities (LQ) 5 kg
· Transport category 3
· Tunnel restriction code E
· UN "Model Regulation": UN 3261 CORROSIVE SOLID, ACIDIC, ORGANIC,
N . O . S . ( D O D E M O R P H ( I S O ) ) , 8 , I I I ,
ENVIRONMENTALLY HAZARDOUS
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Philippines Inventory of Chemicals and Chemical Substances Substance is not listed.
· Australian Inventory of Chemical Substances Substance is not listed.
· Standard for the Uniform Scheduling of Medicines and Poisons Substance is not listed.
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I Substance is not listed.
· Seveso category E1 Hazardous to the Aquatic Environment
· Qualifying quantity (tonnes) for the application of lower-tier requirements 100 t
· Qualifying quantity (tonnes) for the application of upper-tier requirements 200 t
15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!