US Shop

New user? / Forgot your password?

0 Item | 0,00 €

2,3-Dimethylphenol

Item number680689
CAS526-75-0
FormulaC8H10O
Molecular weight122,16 g/mol
Quantity 1X500MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
2,3-Dimethylphenol

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

2,3-Dimethylphenol

2,3-Dimethylphenol

680689
526-75-0

1X500MG

Please log in.

2,3-Dimethylphenol solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

2,3-Dimethylphenol solution

680690
526-75-0

1X5ML

Please log in.

2,4-Dimethylphenol

2,4-Dimethylphenol

675868
105-67-9

1X500MG

Please log in.

2,4-Dimethylphenol solution
Concentration: 100 µg/ml
Solvent: Methanol

2,4-Dimethylphenol solution

681689
105-67-9

1X5ML

Please log in.

2,5-Dimethylphenol

2,5-Dimethylphenol

680693
95-87-4

1X500MG

Please log in.

2,5-Dimethylphenol solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

100 µg/ml Acetonitrile

2,5-Dimethylphenol solution

680694
95-87-4

1X5ML

Please log in.

2,6-Dimethylphenol

2,6-Dimethylphenol

677730
576-26-1

1X500MG

Please log in.

3,4-Dimethylphenol

3,4-Dimethylphenol

675173
95-65-8

1X500MG

Please log in.

3,4-Dimethylphenol solution
Concentration: 100 µg/ml
Solvent: Methanol

3,4-Dimethylphenol solution

675174
95-65-8

1X5ML

Please log in.

3,5-Dimethylphenol

3,5-Dimethylphenol

676503
108-68-9

1X500MG

Please log in.

D3-2,6-Dimethylphenol

D3-2,6-Dimethylphenol

686556

1X10MG

Please log in.

D3-2,6-Dimethylphenol solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

D3-2,6-Dimethylphenol solution

686557

1X1ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 24.11.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:2,3-Dimethylphenol
Catalog No.:680689
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
GHS06 skull and crossbones
Acute Tox. 3 H301 Toxic if swallowed.
Acute Tox. 3 H311 Toxic in contact with skin.
GHS05 corrosion
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
GHS09 environment
Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.
Label elements
PictogramGHS05 acid
acid
GHS06 skull
skull
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
· Hazard pictograms
GHS05 GHS06 GHS09
· Signal word Danger
· Hazard statements
H301+H311 Toxic if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.
H411 Toxic to aquatic life with long lasting effects.
· Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS
FormulaC8H10O
Molecular Weight (g/mol)122.16
CAS-No.526-75-0
FIRST AID MEASURES· 4.1 Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact:
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
Rinse mouth. Do not induce vomiting.
Call for a doctor immediately.
· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
FIRE-FIGHTING MEASURES· 5.1 Extinguishing media
· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· 5.2 Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
· 5.3 Advice for firefighters
· Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES· 6.1 Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
· 6.2 Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
HANDLING AND STORAGE· 7.1 Precautions for safe handling
Ensure good ventilation/extraction at the workplace.
Remove dust thoroughly.
Store in cool, dry place in tightly closed receptacles.
· Information about fire - and explosion protection: Keep respiratory protective device available.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Store in a cool location.
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle unless other advice is given on the CoA.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions: Keep container tightly sealed.
· 7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTION· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace: Not required.
· Additional information: Lists used were valid at the time of SDS preparation.
· 8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374
Protective gloves
· Material of gloves
Butyl rubber, BR
Fluorocarbon rubber (Viton)
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection:
Tightly sealed goggles
PHYSICAL AND CHEMICAL PROPERTIES· 9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Crystalline
Colour: Light brown
· Odour: Pungent
· Odour threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/freezing point: 74-75 °C
Initial boiling point and boiling range: 217-218 °C (760 mmHg)
· Flash point: 95 °C
· Flammability (solid, gas): Not determined.
· Decomposition temperature: Not determined.
· Auto-ignition temperature: Not determined.
· Explosive properties: Not determined.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure: Not applicable.
· Density at 20 °C: 1.04 g/cm³
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water at 25 °C: 4.6 g/l
· Partition coefficient: n-octanol/water: 2.48 log P
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· 9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY· 10.1 Reactivity Stable under normal conditions.
· 10.2 Chemical stability Stable under normal conditions.
· Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
· 10.3 Possibility of hazardous reactions No dangerous reactions known.
· 10.4 Conditions to avoid
Heat.
Sources of ignition
Moisture.
Air.
Light.
· 10.5 Incompatible materials: Strong oxidizing agents.
· 10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
Carbon monoxide and carbon dioxide
TOXICOLOGICAL INFORMATION· 11.1 Information on toxicological effects
· Acute toxicity
Toxic if swallowed or in contact with skin.
· LD/LC50 values relevant for classification:
Oral LD50 562 mg/kg (rat)
Dermal LD50 1,040 mg/kg (rabbit)
· Primary irritant effect:
· Skin corrosion/irritation
Causes severe skin burns and eye damage.
· Serious eye damage/irritation
Causes severe skin burns and eye damage.
· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION· 12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
· 12.2 Persistence and degradability No further relevant information available.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· Ecotoxicological effects:
· Remark: Toxic for fish
· Additional ecological information:
· General notes:
Water hazard class 3 (German Regulation) (Assessment by list): extremely hazardous for water
Do not allow product to reach ground water, water course or sewage system, even in small quantities.
Must not reach sewage water or drainage ditch undiluted or unneutralised.
Danger to drinking water if even extremely small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS· 13.1 Waste treatment methods
· Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packaging:
· Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION· 14.1 UN-Number
· ADR, IMDG, IATA UN2261
· ADR 2261 XYLENOLS, SOLID, ENVIRONMENTALLY
HAZARDOUS
· IMDG XYLENOLS, SOLID, MARINE POLLUTANT
· IATA Xylenols, solid
· 14.3 Transport hazard class(es)
· ADR, IMDG
· Class 6.1 Toxic substances.
· Label 6.1
· IATA
· Class 6.1 Toxic substances.
· Label 6.1
· 14.4 Packing group
· ADR, IMDG, IATA II
· 14.5 Environmental hazards: Environmentally hazardous substance, solid; Marine
Pollutant
· Marine pollutant: Symbol (fish and tree)
· Special marking (ADR): Symbol (fish and tree)
· 14.6 Special precautions for user Warning: Toxic substances.
· Danger code (Kemler): 60
· EMS Number: F-A,S-A
· Stowage Category A
· 14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· Transport/Additional information:
· ADR
· Limited quantities (LQ) 500 g
· Transport category 2
· Tunnel restriction code D/E
· UN "Model Regulation": U N 2 2 6 1 X Y L E N O L S , S O L I D , 6 . 1 , I I ,
ENVIRONMENTALLY HAZARDOUS
REGULATORY INFORMATION· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I Substance is not listed.
· Seveso category E2 Hazardous to the Aquatic Environment
· Qualifying quantity (tonnes) for the application of lower-tier requirements 200 t
· Qualifying quantity (tonnes) for the application of upper-tier requirements 500 t
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!