New user? / Forgot your password?
0 Item | 0,00 €
Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!
Cypermethrin
| Item number | 672835 |
| CAS | 52315-07-8 |
| Formula | C22H19Cl2NO3 |
| Molecular weight | 416,30 g/mol |
| Quantity | 1X100MG |
| storage conditions | 20 °C |
| CoA / MSDS | Retrieve CoA Retrieve MSDS |
Price | Please log in. |
Part of Product groups:
Product Variations:
Product | Catalog No./ CAS No. | Quantity | Price | |
|---|---|---|---|---|
 | 673988 | 1X100MG | Please log in. | |
alpha-Cypermethrin solution |  | 673989 | 1X5ML | Please log in. |
alpha-Cypermethrin solution 10 µg/ml Cyclohexane |  | 673990 | 1X10ML | Please log in. |
alpha-Cypermethrin solution |  | 688846 | 1X5ML | Please log in. |
alpha-Cypermethrin solution |  | 692537 | 1X5ML | Please log in. |
 | 678227 | 1X100MG | Please log in. | |
beta-Cypermethrin solution |  | 683731 | 1X10ML | Please log in. |
beta-Cypermethrin solution |  | 688843 | 1X5ML | Please log in. |
 | 672835 | 1X100MG | Please log in. | |
Cypermethrin solution |  | 673520 | 1X5ML | Please log in. |
Cypermethrin solution |  | 678375 | 1X5ML | Please log in. |
Cypermethrin solution |  | 689384 | 1X5ML | Please log in. |
 | 676385 | 1X10MG | Please log in. | |
D5-Cypermethrin solution |  | 676530 | 1X1ML | Please log in. |
D6-trans-Cypermethrin solution |  | 687199 | 1X1ML | |
 | 680421 | 1X100MG | Please log in. | |
zeta-Cypermethrin solution |  | 680422 | 1X1ML | Please log in. |
zeta-Cypermethrin solution |  | 688915 | 1X5ML | Please log in. |
| Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 16.11.2024 |
| IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
| Product name: | Cypermethrin |
| Catalog No.: | 672835 |
| Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
| Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
| Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
| HAZARDS IDENTIFICATION | 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 GHS08 health hazard STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure. GHS09 environment Aquatic Acute 1 H400 Very toxic to aquatic life. Aquatic Chronic 1 H410 Very toxic to aquatic life with long lasting effects. GHS07 Acute Tox. 4 H302 Harmful if swallowed. Acute Tox. 4 H332 Harmful if inhaled. STOT SE 3 H335 May cause respiratory irritation. |
| Label elements | |
| Pictogram | GHS07 exclam exclam GHS08 silhouete silhouete GHS09 Aquatic-pollut-red Aquatic-pollut-red |
| 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the CLP regulation. · Hazard pictograms GHS07 GHS08 GHS09 · Signal word Warning · Hazard statements H302+H332 Harmful if swallowed or if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. · Precautionary statements P260 Do not breathe dust/fume/gas/mist/vapours/spray. P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. | |
| COMPOSITION/INFORMATION ON INGREDIENTS | 3.1 Chemical characterisation: Substances · CAS No. Description 52315-07-8 cypermethrin cis/trans +/-40/60 · Identification number(s) None · EC number: 257-842-9 · Index number: 607-421-00-4 · RTECS: GZ1250000 |
| Formula | C22H19Cl2NO3 |
| Molecular Weight (g/mol) | 416.30 |
| CAS-No. | 52315-07-8 |
| FIRST AID MEASURES | 4.1 Description of first aid measures · General information: Symptoms of poisoning may occur even after several hours; therefore medical observation for at least 48 hours after the accident is recommended. · After inhalation: Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient in recovery position for transport. Seek medical treatment. · After skin contact: Immediately wash with water and soap and rinse thoroughly. · After eye contact: Rinse opened eye for several minutes under running water. · After swallowing: Rinse mouth. Do not induce vomiting. Seek medical treatment. 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. |
| FIRE-FIGHTING MEASURES | 5.1 Extinguishing media · Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. 5.2 Special hazards arising from the substance or mixture Formation of toxic gases is possible during heating or in case of fire. 5.3 Advice for firefighters · Protective equipment: Mouth respiratory protective device. Wear self-contained respiratory protective device. |
| ACCIDENTAL RELEASE MEASURES | 6.1 Personal precautions, protective equipment and emergency procedures Avoid formation of dust. 6.2 Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. 6.3 Methods and material for containment and cleaning up: Dispose of contaminated material as waste according to item 13. Ensure adequate ventilation. 6.4 Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. |
| HANDLING AND STORAGE | 7.1 Precautions for safe handling Ensure good ventilation/extraction at the workplace. Remove dust thoroughly. Store in cool, dry place in tightly closed receptacles. · Information about fire - and explosion protection: No special measures required. 7.2 Conditions for safe storage, including any incompatibilities · Storage: · Requirements to be met by storerooms and receptacles: Please refer to the manufacturers certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA. Keep container in a well-ventilated place. Keep away from sources of ignition and heat. · Information about storage in one common storage facility: Store away from foodstuffs. · Further information about storage conditions: Keep container tightly sealed. 7.3 Specific end use(s) No further relevant information available. |
| EXPOSURE CONTROLS/PERSONAL PROTECTION | 8.1 Control parameters · Ingredients with limit values that require monitoring at the workplace: Not required. · Additional information: Lists used were valid at the time of SDS preparation. 8.2 Exposure controls · Personal protective equipment: · General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. Store protective clothing separately. · Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. · Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374 Protective gloves · Material of gloves Butyl rubber, BR · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles |
| PHYSICAL AND CHEMICAL PROPERTIES | 9.1 Information on basic physical and chemical properties · General Information · Appearance: Form: Viscous liquid Colour: Yellowish · Odour: Odourless · Odour threshold: Not determined. · pH-value: Not applicable. · Change in condition Melting point/freezing point: 41 °C Initial boiling point and boiling range: Not determined. · Flash point: >79 °C · Flammability (solid, gas): Not determined. · Ignition temperature: Not determined · Decomposition temperature: Not determined. · Auto-ignition temperature: Not determined. · Explosive properties: Not determined. · Explosion limits: Lower: Not determined. Upper: Not determined. · Vapour pressure: Not applicable. · Density at 20 °C: 1.28 g/cm³ · Relative density Not determined. · Vapour density Not applicable. · Evaporation rate Not applicable. · Solubility in / Miscibility with Acetone, Dichloromethane, Methanol · water: Insoluble. · Partition coefficient: n-octanol/water: 5.3-5.6 Log Pow · Viscosity: Dynamic: Not applicable. Kinematic: Not applicable. 9.2 Other information No further relevant information available. |
| STABILITY AND REACTIVITY | 10.1 Reactivity Stable under normal conditions. 10.2 Chemical stability Stable under normal conditions. · Thermal decomposition / conditions to be avoided: Formation of toxic gases is possible during heating or in case of fire. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid Heat. 10.5 Incompatible materials: Strong oxidizing agents. 10.6 Hazardous decomposition products: Formation of toxic gases is possible during heating or in case of fire. |
| TOXICOLOGICAL INFORMATION | 11.1 Information on toxicological effects · Acute toxicity Harmful if swallowed or if inhaled. · LD/LC50 values relevant for classification: Dermal (LD50) >1,600 mg/kg (rat) >2,400 mg/kg (rabbit) · Primary irritant effect: · Skin corrosion/irritation Based on available data, the classification criteria are not met. · Serious eye damage/irritation Based on available data, the classification criteria are not met. · Respiratory or skin sensitisation Based on available data, the classification criteria are not met. · CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure May cause respiratory irritation. · STOT-repeated exposure May cause damage to organs through prolonged or repeated exposure. · Aspiration hazard Based on available data, the classification criteria are not met. |
| ECOLOGICAL INFORMATION | 12.1 Toxicity · Aquatic toxicity: EC50/48 h 0.000735 mg/l (crustacean) 0.0002 mg/l (daphnia) LC50/96 h 0.00317 mg/l (fish) 12.2 Persistence and degradability No further relevant information available. 12.3 Bioaccumulative potential No further relevant information available. 12.4 Mobility in soil No further relevant information available. · Ecotoxicological effects: · Remark: Very toxic for fish · Additional ecological information: · General notes: Water hazard class 3 (German Regulation) (Assessment by list): extremely hazardous for water Do not allow product to reach ground water, water course or sewage system, even in small quantities. Danger to drinking water if even extremely small quantities leak into the ground. Also poisonous for fish and plankton in water bodies. Very toxic for aquatic organisms 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. 12.6 Other adverse effects No further relevant information available. |
| DISPOSAL CONSIDERATIONS | 13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · European waste catalogue Waste disposal key numbers from EWC have to be assigned depending on origin and processing. · Uncleaned packaging: · Recommendation: Dispose of in accordance with national regulations. |
| TRANSPORT INFORMATION | 14.1 UN-Number · ADR, IMDG, IATA UN3077 · ADR 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (cypermethrin cis/trans +/-40/60) · IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (cypermethrin cis/trans +/-40/60), MARINE POLLUTANT · IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (cypermethrin cis/trans +/-40/60) 14.3 Transport hazard class(es) · ADR, IMDG, IATA · Class 9 Miscellaneous dangerous substances and articles. · Label 9 14.4 Packing group · ADR, IMDG, IATA III 14.5 Environmental hazards: · Marine pollutant: Symbol (fish and tree) · Special marking (ADR): Symbol (fish and tree) · Special marking (IATA): Symbol (fish and tree) 14.6 Special precautions for user Warning: Miscellaneous dangerous substances and articles. · Danger code (Kemler): 90 · EMS Number: F-A,S-F · Stowage Category A · Stowage Code SW23 When transported in BK3 bulk container, see 7.6.2.12 and 7.7.3.9. 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. · Transport/Additional information: · ADR · Limited quantities (LQ) 5 kg · Excepted quantities (EQ) Code: E1 Maximum net quantity per inner packaging: 30 g Maximum net quantity per outer packaging: 1000 g · Transport category 3 · UN "Model Regulation": UN 3 0 7 7 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (CYPERMETHRIN CIS/ TRANS +/-40/60), 9, III |
| REGULATORY INFORMATION | 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Directive 2012/18/EU · Named dangerous substances - ANNEX I Substance is not listed. · Seveso category E1 Hazardous to the Aquatic Environment · Qualifying quantity (tonnes) for the application of lower-tier requirements 100 t · Qualifying quantity (tonnes) for the application of upper-tier requirements 200 t 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. |
| OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |