Cyclosulfamuron

Item number	685042
CAS	136849-15-5
Formula	C17H19N5O6S
Molecular weight	421,43 g/mol
Quantity	1X100MG
storage conditions	4 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS

Price

Please log in.

Product Variations:

Product		Catalog No./ CAS No.	Quantity	Price
Cyclosulfamuron		685042 136849-15-5	1X100MG	Please log in.
Cyclosulfamuron solution Concentration: 100 µg/ml Solvent: Acetonitrile		685043 136849-15-5	1X5ML	Please log in.

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 27.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	Cyclosulfamuron
Catalog No.:	685042
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com
Emergency telephone number	HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours.
HAZARDS IDENTIFICATION	2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Eye irritation (Category 2), H319 Short-term (acute) aquatic hazard (Category 1), H400
Label elements
Pictogram	GHS07 exclam exclam GHS09 Aquatic-pollut-red Aquatic-pollut-red
	2.2 Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal word Warning Hazard statement(s) H319 Causes serious eye irritation. H400 Very toxic to aquatic life. Precautionary statement(s) P273 Avoid release to the environment. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard Statements none 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS	3.1 Substances Synonyms : 1-[2-(cyclopropylcarbonyl)phenylsulfamoyl]-3-(4,6- dimethoxypyrimidin-2-yl)urea N-[[[2-(cyclopropylcarbonyl)phenyl]amino]sulfonyl]-N′-(4,6- dimethoxy-2-pyrimidinyl)urea Molecular weight : 421,43 g/mol CAS-No. : 136849-15-5 Component Classification Concentration Cyclosulfamuron Aquatic Acute 1; Aquatic Chronic 1; H400, H410 M-Factor - Aquatic Acute: 1.000 M-Factor - Aquatic Chronic: 1.000 <= 100 %
Formula	C17H19N5O6S
Molecular Weight (g/mol)	421.43
CAS-No.	136849-15-5
FIRST AID MEASURES	4.1 Description of first-aid measures General advice Consult a physician. Show this material safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available
FIRE-FIGHTING MEASURES	5.1 Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, Nitrogen oxides (NOx), Sulfur oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information No data available
ACCIDENTAL RELEASE MEASURES	6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. 6.3 Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13.
HANDLING AND STORAGE	7.1 Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Keep container tightly closed in a dry and well-ventilated place. Store in cool place. Recommended storage temperature 2 - 8 °C 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION	8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Body Protection Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
PHYSICAL AND CHEMICAL PROPERTIES	9.1 Information on basic physical and chemical properties a) Appearance Form: solid Color: white b) Odor characteristic c) Odor Threshold No data available d) pH No data available e) Melting point/freezing point Melting point/range: 161,9 °C f) Initial boiling point and boiling range No data available g) Flash point No data available h) Evaporation rate No data available i) Flammability (solid, gas) No data available j) Upper/lower flammability or explosive limits No data available k) Vapor pressure 220 hPa at 20 °C l) Vapor density No data available m) Relative density 0,624 g/cm3 at 20 °C n) Water solubility No data available o) Partition coefficient: n-octanol/water No data available p) Autoignition temperature No data available q) Decomposition temperature No data available r) Viscosity No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information No data available
STABILITY AND REACTIVITY	10.1 Reactivity No data available 10.2 Chemical stability Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions No data available 10.4 Conditions to avoid No data available 10.5 Incompatible materials Strong oxidizing agents 10.6 Hazardous decomposition products Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen oxides (NOx), Sulfur oxides Other decomposition products - No data available In the event of fire: see section 5
TOXICOLOGICAL INFORMATION	11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - > 5.000 mg/kg LC50 Inhalation - Rat - 4 h - > 5,2 mg/l LD50 Dermal - Rabbit - > 4.000 mg/kg LD50 Eyes - Rabbit - > 4.000 mg/kg Skin corrosion/irritation Skin - Rabbit Result: No skin irritation Serious eye damage/eye irritation Eyes - Rabbit Result: Mild eye irritation Respiratory or skin sensitization No data available Germ cell mutagenicity No data available Result: Not mutagenic in Ames Test. Carcinogenicity IARC: No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
ECOLOGICAL INFORMATION	12.1 Toxicity Toxicity to fish LC50 - Oncorhynchus mykiss (rainbow trout) - > 7,7 mg/l - 96,0 h LC50 - Lepomis macrochirus (Bluegill sunfish) - > 8,2 mg/l - 96,0 h Toxicity to daphnia and other aquatic invertebrates LC50 - Daphnia - > 9,1 mg/l - 48 h Toxicity to algae EC50 - Algae - 0,00044 mg/l - 72 h 12.2 Persistence and degradability No data available 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Other adverse effects Very toxic to aquatic life.
DISPOSAL CONSIDERATIONS	13.1 Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself. Contaminated packaging Dispose of as unused product.
TRANSPORT INFORMATION	14.1 UN number ADR/RID: 3077 IMDG: 3077 IATA: 3077 14.2 UN proper shipping name ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Cyclosulfamuron) IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Cyclosulfamuron) IATA: Environmentally hazardous substance, solid, n.o.s. (Cyclosulfamuron) 14.3 Transport hazard class(es) ADR/RID: 9 IMDG: 9 IATA: 9 14.4 Packaging group ADR/RID: III IMDG: III IATA: III 14.5 Environmental hazards ADR/RID: yes IMDG Marine pollutant: yes IATA: yes 14.6 Special precautions for user Further information EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.
REGULATORY INFORMATION	15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!

Products

Filter

Cyclosulfamuron