New user? / Forgot your password?
0 Item | 0,00 €
Item number | 677780 |
CAS | 95465-99-9 |
Formula | C10H23O2PS2 |
Molecular weight | 270,39 g/mol |
Quantity | 1X50MG |
storage conditions | -20 °C |
CoA / MSDS | Retrieve CoA Retrieve MSDS |
Product | Catalog No./ CAS No. | Quantity | Price | |
---|---|---|---|---|
Cadusafos solution | 673218 | 1X10ML | Please log in. | |
Cadusafos solution | 673219 | 1X5ML | Please log in. | |
677780 | 1X50MG | Please log in. |
Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 27.12.2024 |
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
Product name: | Cadusafos |
Catalog No.: | 677780 |
Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
HAZARDS IDENTIFICATION | 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 2), H300 Acute toxicity, Inhalation (Category 1), H330 Acute toxicity, Dermal (Category 1), H310 Acute aquatic toxicity (Category 1), H400 |
Label elements | |
Pictogram | GHS06 skull skull GHS07 exclam exclam GHS09 Aquatic-pollut-red Aquatic-pollut-red |
Signal word Danger Hazard statement(s) H300 + H310 + H330 Fatal if swallowed, in contact with skin or if inhaled H400 Very toxic to aquatic life. Precautionary statement(s) P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P264 Wash hands thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing. P284 Wear respiratory protection. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. Supplemental Hazard Statements none 2.3 Other hazards - none | |
COMPOSITION/INFORMATION ON INGREDIENTS | 3.1 Substances Synonyms : S,S-di-sec-butyl O-ethyl phosphorodithioate O-Ethyl S,S-bis(1-methylpropyl) phosphorodithioate Formula : C10H23O2PS2 Molecular weight : 270.39 g/mol CAS-No. : 95465-99-9 Hazardous ingredients according to Regulation (EC) No 1272/2008 Component: S,S-di-sec-butyl O-ethyl phosphorodithioate CAS-No. 95465-99-9 Classification: Acute Tox. 2; Acute Tox. 1; Aquatic Acute 1; H300, H330, H310, H400 M-Factor - Aquatic Acute: 10 Concentration: <= 100 % |
Formula | C10H23O2PS2 |
Molecular Weight (g/mol) | 270.39 |
CAS-No. | 95465-99-9 |
FIRST AID MEASURES | 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available |
FIRE-FIGHTING MEASURES | 5.1 Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, Sulphur oxides, Oxides of phosphorus 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information No data available |
ACCIDENTAL RELEASE MEASURES | 6.1 Personal precautions, protective equipment and emergency procedures Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13. |
HANDLING AND STORAGE | 7.1 Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Normal measures for preventive fire protection. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Recommended storage temperature 2 - 8 °C 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
EXPOSURE CONTROLS/PERSONAL PROTECTION | 8.1 Control parameters 8.2 Exposure controls Appropriate engineering controls Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use (US) or type ABEK (EN 14387) respirator cartridges as a backup to enginee protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. |
PHYSICAL AND CHEMICAL PROPERTIES | 9.1 Information on basic physical and chemical properties a) Appearance Form: liquid Colour: colourless yellow b) Odour No data available c) Odour Threshold No data available d) pH No data available e) Melting point/freezing point No data available f) Initial boiling point and boiling range 112 - 114 °C at 1.1 hPa g) Flash point 129.4 °C h) Evaporation rate No data available i) Flammability (solid, gas) No data available j) Upper/lower flammability or explosive limits No data available k) Vapour pressure No data available l) Vapour density No data available m) Relative density 1.054 g/cm3 at 20 °C n) Water solubility 0.248 g/l o) Partition coefficient: noctanol/ water Pow: 3.9 at 20 °C p) Auto-ignition temperature No data available q) Decomposition temperature No data available r) Viscosity No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information No data available |
STABILITY AND REACTIVITY | 10.1 Reactivity No data available 10.2 Chemical stability Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions No data available 10.4 Conditions to avoid No data available 10.5 Incompatible materials Strong acids and oxidizing agents 10.6 Hazardous decomposition products Hazardous decomposition products formed under fire conditions. - Carbon oxides, Sulphur oxides, Oxides of phosphorus Other decomposition products - No data available In the event of fire: see section 5 |
TOXICOLOGICAL INFORMATION | 11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - 37.1 mg/kg(S,S-di-sec-butyl O-ethyl phosphorodithioate) LD50 Oral - Mouse - 71.4 mg/kg(S,S-di-sec-butyl O-ethyl phosphorodithioate) LC50 Inhalation - Rat - 4 h - 0.026 mg/l(S,S-di-sec-butyl O-ethyl phosphorodithioate) LD50 Dermal - Rabbit - male - 24.4 mg/kg(S,S-di-sec-butyl O-ethyl phosphorodithioate) LD50 Dermal - Rabbit - female - 41.8 mg/kg(S,S-di-sec-butyl O-ethyl phosphorodithioate) Skin corrosion/irritation Skin - Rabbit(S,S-di-sec-butyl O-ethyl phosphorodithioate) Result: No skin irritation Serious eye damage/eye irritation Eyes - Rabbit(S,S-di-sec-butyl O-ethyl phosphorodithioate) Result: No eye irritation Respiratory or skin sensitisation No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) Germ cell mutagenicity No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) Specific target organ toxicity - single exposure No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.(S,S-di-sec-butyl O-ethyl phosphorodithioate) |
ECOLOGICAL INFORMATION | 12.1 Toxicity Toxicity to fish LC50 - Oncorhynchus mykiss (rainbow trout) - 0.13 mg/l - 96.0 h(S,S-di-secbutyl O-ethyl phosphorodithioate) LC50 - Lepomis macrochirus (Bluegill sunfish) - 0.17 mg/l - 96.0 h(S,S-di-secbutyl O-ethyl phosphorodithioate) Toxicity to daphnia and other aquatic invertebrates LC50 - Daphnia (water flea) - 0.0013 mg/l - 48 h(S,S-di-sec-butyl O-ethyl phosphorodithioate) Toxicity to algae EC50 - Algae - 5.3 mg/l - 96 h(S,S-di-sec-butyl O-ethyl phosphorodithioate) 12.2 Persistence and degradability 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available(S,S-di-sec-butyl O-ethyl phosphorodithioate) 12.5 Results of PBT and vPvB assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted 12.6 Other adverse effects Very toxic to aquatic life. |
DISPOSAL CONSIDERATIONS | 13.1 Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product. |
TRANSPORT INFORMATION | 14.1 UN number UN number: 3077, Enviromental Hazardous substance, solid, N.O.S. 14.2 Hazchem Code:2Z 14.3 Special Provision: 274,331,335,375, AU01 14.4 Limited quantities: ADG 7 specities a Limited Quantity value of 5kg for this class of product. 14.5 Dangerous Goods Class: Class9: Miscellaneous Dangerous Goods. 14.6 Packing Group: III 14.7 Packing Instruction: P002, IBC08, LP02 Class 9 Miscellaneous Dangerous Goods shall not be loaded in the same vehicle or packed in the same freight container with Dangerous Goods of Class 1 (Explosives) |
REGULATORY INFORMATION | SECTION 15: Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. 15.2 Chemical safety assessment For this product a chemical safety assessment was not carried out |
OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |