US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

tert-Butyl ethyl ether

Item number677145
CAS637-92-3
FormulaC6H14O
Molecular weight102,17 g/mol
Quantity 1X100MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
tert-Butyl ethyl ether

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Butyl ethyl ether

Butyl ethyl ether

683113
628-81-9

1X1000MG

On request

tert-Butyl ethyl ether solution
Concentration: 200 µg/ml
Solvent: Methanol

tert-Butyl ethyl ether solution

677144
637-92-3

1X1ML

Please log in.

tert-Butyl ethyl ether

tert-Butyl ethyl ether

677145
637-92-3

1X100MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 27.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:tert-Butyl ethyl ether
Catalog No.:677145
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 2), H225
Specific target organ toxicity - single exposure (Category 3), Central nervous system, H336 Classification according to EU Directives 67/548/EEC or 1999/45/EC
F Highly flammable R11, R67
Label elements
Pictogramflamme
flamme
GHS07 exclam
exclam
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram Signal word Danger
Hazard statement(s)
H225 Highly flammable liquid and vapour.
H336 May cause drowsiness or dizziness Precautionary statement(s)
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P261 Avoid breathing vapours.
Supplemental Hazard
Statements
none
2.3 Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Formula : C6H14O
Molecular Weight : 102,17 g/mol
CAS-No. : 637-92-3
EC-No. : 211-309-7
No components need to be disclosed according to the applicable regulations
FormulaC6H14O
Molecular Weight (g/mol)102.17
CAS-No.637-92-3
FIRST AID MEASURES4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
4.3 Indication of any immediate medical attention and special treatment needed
no data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13).
6.4 Reference to other sections
For disposal see section 13
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands. Body Protection
impervious clothing, Flame retardant antistatic protective clothing, The type of protective
equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: clear, liquid
Colour: colourless
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing
point
Melting point/range: -97 °C - lit.
f) Initial boiling point and
boiling range
72 - 73 °C - lit.
g) Flash point -19 °C - closed cup
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower
flammability or
explosive limits
no data available
k) Vapour pressure 207 hPa at 25 °C
l) Vapour density no data available
m) Relative density 0,742 g/cm3 at 25 °C
n) Water solubility 14,3 g/l at 25,00 °C - OECD Test Guideline 105
o) Partition coefficient: noctanol/
water
log Pow: 1,48 at 25 °C
p) Auto-ignition
temperature
392 °C at 1.003,40 - 1.009,20 hPa q) Decomposition
temperature
no data available
r) Viscosity 0,53 mm2/s at 20 °C -
s) Explosive properties no data available
t) Oxidizing properties no data available
9.2 Other safety information
Surface tension 72,1 mN/m at 21 °C
STABILITY AND REACTIVITY10.1 Reactivity
no data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
no data available
10.4 Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - rat - male and female - > 2.003 mg/kg
(OECD Test Guideline 401)
LC50 Inhalation - rat - male and female - 4 h - > 5,88 mg/l
(OECD Test Guideline 403)
LD50 Dermal - rabbit - male and female - > 2.000 mg/kg
(OECD Test Guideline 402)
Skin corrosion/irritation
Skin - rabbit
Result: No skin irritation - 4 h
(OECD Test Guideline 404)
Serious eye damage/eye irritation
Eyes - rabbit
Result: No eye irritation - 24 h
(OECD Test Guideline 405)
Respiratory or skin sensitisation
Maximisation Test - guinea pig
Result: Does not cause skin sensitisation.
(OECD Test Guideline 406)
Germ cell mutagenicity
Ames test
S. typhimurium
Result: negative rat - male and female
Result: negative
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause drowsiness or dizziness. - Central nervous system
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
Repeated dose toxicity - rat - female - Oral - No observed adverse effect level - 400 mg/kg
RTECS: KN4730200
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated
ECOLOGICAL INFORMATION12.1 Toxicity
Toxicity to fish semi-static test LC50 - Poecilia reticulata (guppy) - > 974,1 mg/l - 96 h
(OECD Test Guideline 203)
Toxicity to daphnia and
other aquatic
invertebrates
static test EC50 - Daphnia magna (Water flea) - 110 mg/l - 48 h
(OECD Test Guideline 202)
Toxicity to algae static test EC50 - Pseudokirchneriella subcapitata (Selenastrum capricornutum)
- 1.100 mg/l - 72 h
(OECD Test Guideline 201)
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
no data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company. Contaminated packaging
Dispose of as unused product
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3271 IMDG: 3271 IATA: 3271
14.2 UN proper shipping name
ADR/RID: ETHERS, N.O.S. (2-Ethoxy-2-methylpropane)
IMDG: ETHERS, N.O.S. (2-Ethoxy-2-methylpropane)
IATA: Ethers, n.o.s. (2-Ethoxy-2-methylpropane)
14.3 Transport hazard class(es)
ADR/RID: 3 IMDG: 3 IATA: 3
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
no data available
REGULATORY INFORMATIONThis safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!