US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

Amitraz

Item number672811
CAS33089-61-1
FormulaC19H23N3
Molecular weight293,40 g/mol
Quantity 1X250MG
storage conditions-20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Amitraz

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Amitraz

Amitraz

672811
33089-61-1

1X250MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 27.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Amitraz
Catalog No.:672811
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS08 health hazard: STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
GHS09 environment: Aquatic Acute 1 H400 Very toxic to aquatic life. Aquatic Chronic 1 H410 Very toxic to aquatic life with long lasting effects.
GHS07: Acute Tox. 4 H302 Harmful if swallowed. Skin Sens. 1 H317 May cause an allergic skin reaction.
Label elements
PictogramGHS07 exclam
exclam
GHS08 silhouete
silhouete
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
Signal word: Warning
Hazard statements:
H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements:
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Chemical characterisation: Substances
CAS No. Description: 33089-61-1 amitraz (ISO)
Identification number(s) None
EC number: 251-375-4
Index number: 612-086-00-2
RTECS: ZF 0480000
FormulaC19H23N3
Molecular Weight (g/mol)293.40
CAS-No.33089-61-1
FIRST AID MEASURES4.1 Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may occur even after several hours; therefore medical observation for at least 48
hours after the accident is recommended.
After inhalation:
Supply fresh air and call a doctor.
In case of unconsciousness place patient in recovery position for transport.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing:
Rinse mouth. Do not induce vomiting.
Seek medical treatment.
4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.
5.2 Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
5.3 Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
6.2 Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
6.3 Methods and material for containment and cleaning up:
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
HANDLING AND STORAGE7.1 Precautions for safe handling
Ensure good ventilation/extraction at the workplace.
Store in cool, dry place in tightly closed receptacles.
Information about fire - and explosion protection: Keep respiratory protective device available.
7.2 Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
Information about storage in one common storage facility: Store away from foodstuffs.
Further information about storage conditions: None.
7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTIONAdditional information about design of technical facilities: No further data; see item 7.
8.1 Control parameters
Ingredients with limit values that require monitoring at the workplace: Not required.
Additional information: Lists used were valid at the time of SDS preparation.
8.2 Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374 Protective gloves
Material of gloves Fluorocarbon rubber (Viton)
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Tightly sealed goggles
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
General Information
Appearance:
Form: Solid
Colour: Off white
Odour: Odourless
Odour threshold: Not determined.
pH-value: Not applicable.
Change in condition
Melting point/freezing point: 86-87 °C
Initial boiling point and boiling range: Not determined.
Flash point: Not applicable.
Flammability (solid, gas): Not determined.
Ignition temperature: Not determined
Decomposition temperature: Not determined.
Auto-ignition temperature: Not determined.
Explosive properties: Not determined.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not applicable.
Density: Not determined.
Relative density Not determined.
Vapour density Not applicable.
Evaporation rate Not applicable.
Solubility in / Miscibility with water: Negligible.
Partition coefficient: n-octanol/water: Not determined.
Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY10.1 Reactivity Stable under normal conditions.
10.2 Chemical stability Stable under normal conditions.
Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
10.3 Possibility of hazardous reactions No dangerous reactions known.
10.4 Conditions to avoid Heat.
10.5 Incompatible materials: Strong oxidizing agents.
10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
Harmful if swallowed.
LD/LC50 values relevant for classification:
Oral LD50 400 mg/kg (rat)
Dermal (LD50) >200 mg/kg (rabbit)
Primary irritant effect:
Skin corrosion/irritation Based on available data, the classification criteria are not met.
Serious eye damage/irritation Based on available data, the classification criteria are not met.
Respiratory or skin sensitisation
May cause an allergic skin reaction.
CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
Germ cell mutagenicity Based on available data, the classification criteria are not met.
Carcinogenicity Based on available data, the classification criteria are not met.
Reproductive toxicity Based on available data, the classification criteria are not met.
STOT-single exposure Based on available data, the classification criteria are not met.
STOT-repeated exposure
May cause damage to organs through prolonged or repeated exposure.
Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION12.1 Toxicity
Aquatic toxicity:
EC50/48 h 1.71 mg/l (crustacean)
LC50/96 h 3.14 mg/l (fish)
12.2 Persistence and degradability No further relevant information available.
12.3 Bioaccumulative potential No further relevant information available.
12.4 Mobility in soil No further relevant information available.
Ecotoxicological effects:
Remark: Very toxic for fish
Additional ecological information:
General notes:
Water hazard class 3 (German Regulation) (Self-assessment): extremely hazardous for water
Do not allow product to reach ground water, water course or sewage system, even in small quantities.
Danger to drinking water if even extremely small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Very toxic for aquatic organisms
12.5 Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
Uncleaned packaging:
Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION14.1 UN-Number
ADR, IMDG, IATA UN3077
ADR 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
SOLID, N.O.S. (amitraz (ISO))
IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
SOLID, N.O.S. (amitraz (ISO)), MARINE POLLUTANT
IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
SOLID, N.O.S. (amitraz (ISO))
14.3 Transport hazard class(es)
ADR, IMDG, IATA
Class 9 Miscellaneous dangerous substances and articles.
Label 9
14.4 Packing group
ADR, IMDG, IATA III
14.5 Environmental hazards:
Marine pollutant: Yes (P)
Symbol (fish and tree)
Special marking (ADR): Symbol (fish and tree)
Special marking (IATA): Symbol (fish and tree)
14.6 Special precautions for user Warning: Miscellaneous dangerous substances and articles.
EMS Number: F-A,S-F
Stowage Category A
Stowage Code SW23 When transported in BK3 bulk container, see 7.6.2.12 and 7.7.3.9.
14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable.
Transport/Additional information:
ADR
Limited quantities (LQ) 5 kg
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 1000 g
Transport category 3
Tunnel restriction code E
UN "Model Regulation": UN 3 0 7 7 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (AMITRAZ (ISO)), 9, III
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Directive 2012/18/EU
Named dangerous substances - ANNEX I Substance is not listed.
Seveso category E1 Hazardous to the Aquatic Environment
Qualifying quantity (tonnes) for the application of lower-tier requirements 100 t
Qualifying quantity (tonnes) for the application of upper-tier requirements 200 t
Regulation (EU) No 649/2012
Annex I Part 1
Annex I Part 2
15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!