US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Allethrin

Item number675378
CAS584-79-2
FormulaC19H26O3
Molecular weight302,41 g/mol
Quantity 1X100MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Allethrin

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Allethrin

Allethrin

675378
584-79-2

1X100MG

Please log in.

Allethrin solution
Concentration: 10.0 µg/ml
Solvent: Acetonitrile

Allethrin solution

680791
584-79-2

1X10ML

Please log in.

Allethrin solution
Concentration: 100 µg/ml
Solvent: Acetonitrile

Allethrin solution

682911
584-79-2

1X5ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 01.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Allethrin
Catalog No.:675378
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 4), H302
Acute toxicity, Inhalation (Category 4), H332
Short-term (acute) aquatic hazard (Category 1), H400
Long-term (chronic) aquatic hazard (Category 1), H410
Label elements
PictogramGHS07 exclam
exclam
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
Label elements
Labelling according Regulation (EC) No 1272/2008
Signal word: Warning
Hazard statement(s)
H302 + H332 Harmful if swallowed or if inhaled.
H410 Very toxic to aquatic life with long lasting effects. Precautionary statement(s)
P273 Avoid release to the environment.
P301 + P312 + P330 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Supplemental Hazard Statements: none
2.3 Other hazards: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Formula : C19H26O3
Molecular weight : 302,41 g/mol
CAS-No. : 584-79-2
EC-No. : 209-542-4
Index-No. : 006-025-00-3
Component Classification Concentration
Allethrin
Acute Tox. 4; Aquatic
Acute 1; Aquatic Chronic
1; H302, H332, H400,
H410
M-Factor - Aquatic Acute:
10
<= 100 %
For the full text of the H-Statements mentioned in this Section, see Section 16.
FormulaC19H26O3
Molecular Weight (g/mol)302.41
CAS-No.584-79-2
FIRST AID MEASURES4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact: Wash off with soap and plenty of water. Consult a physician.
In case of eye contact: Flush eyes with water as a precaution.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
FIRE-FIGHTING MEASURESSECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture: Carbon oxides
5.3 Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
ACCIDENTAL RELEASE MEASURESSECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8.
6.2 Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
HANDLING AND STORAGESECTION 7: Handling and storage
7.1 Precautions for safe handling: Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
7.2 Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in cool place.
EXPOSURE CONTROLS/PERSONAL PROTECTIONSECTION 8: Exposure controls/personal protection
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Body Protection: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection: Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
PHYSICAL AND CHEMICAL PROPERTIESSECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties a) Appearance Form: liquid
b) Odour: No data available
c) Odour Threshold: No data available
d) pH: No data available
e) Melting point/freezing point: No data available
f) Initial boiling point and boiling range: No data available g) Flash point: 66°C
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapour pressure: No data available
l) Vapour density: No data available
m) Relative density: 0,997 g/cm3 at 20°C
n) Water solubility: insoluble
o) Partition coefficient: n-octanol/water: No data available p) Auto-ignition temperature: No data available
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other safety information: No data available
STABILITY AND REACTIVITYSECTION 10: Stability and reactivity
10.1 Reactivity: No data available
10.2 Chemical stability: Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions: No data available 10.4 Conditions to avoid: No data available
10.5 Incompatible materials: Strong oxidizing agents
10.6 Hazardous decomposition products: Hazardous decomposition products formed under fire conditions. - Carbon oxides Other decomposition products - No data available In the event of fire: see section 5.
TOXICOLOGICAL INFORMATIONSECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity: LD50 Oral - Rat - 685 mg/kg LC50 Inhalation - Mouse - > 2.000 mg/m3 LD50 Dermal - Rabbit - 11.332 mg/kg Remarks: Behavioral:Tremor. Behavioral:Excitement.
Skin corrosion/irritation: No data available
Serious eye damage/eye irritation: No data available Respiratory or skin sensitisation: No data available
Germ cell mutagenicity: Hamster Lungs Cytogenetic analysis Ames test S. typhimurium Human fibroblast Result: negative Unscheduled DNA synthesis Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity: No data available
Specific target organ toxicity: - single exposure No data available
Specific target organ toxicity: - repeated exposure No data available
Aspiration hazard: No data available
Additional Information RTECS: GZ1925000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
ECOLOGICAL INFORMATIONSECTION 12: Ecological information
12.1 Toxicity
Toxicity to fish: LC50 - Cyprinus carpio (Carp) - 0,032 mg/l - 96,0 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia pulex (Water flea) - 0,021 mg/l - 48 h 12.2 Persistence and degradability: No data available
12.3 Bioaccumulative potential: No data available
12.4 Mobility in soil: No data available
12.5 Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects: Very toxic to aquatic life.
DISPOSAL CONSIDERATIONSSECTION 13: Disposal considerations
13.1 Waste treatment methods: Product Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.
Contaminated packaging: Dispose of as unused product.
TRANSPORT INFORMATIONSECTION 14: Transport information
14.1 UN number:
ADR/RID: 3082
IMDG: 3082
IATA: 3082
14.2 UN proper shipping name:
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Allethrin)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Allethrin)
IATA: Environmentally hazardous substance, liquid, n.o.s. (Allethrin)
14.3 Transport hazard class(es):
ADR/RID: 9
IMDG: 9
IATA: 9 14.4
Packaging group:
ADR/RID: III
IMDG: III
IATA: III
14.5 Environmental hazards:
ADR/RID: yes
IMDG Marine pollutant: yes
IATA: yes
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
REACH - Restrictions on the manufacture,
placing on the market and use of certain
dangerous substances, preparations and articles
(Annex XVII)
:
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!