Hotline:
+49 (0) 34291 / 33 72 36
contact@hpc-standards.com

US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!

Filter

  • Package Size
  •   1 Unit
  •   2 Units
  •   3 Units
  •   4 Units
  •   7 Units
  •   8 Units
  •   11 Units
  •   100 Units
  •   600 Units
  • Volume
  •   10
  •   0 mg
  •   1 mg
  •   2 mg
  •   2.14 mg
  •   2.5 mg
  •   2.59 mg
  •   5 mg
  •   10 mg
  •   20 mg
  •   25 mg
  •   50 mg
  •   100 mg
  •   200 mg
  •   250 mg
  •   500 mg
  •   1000 mg
  •   5000 mg
  •   0.5 ml
  •   1 ml
  •   5 ml
  •   10 ml
  •   100 ml
  •   500 ml
  •   0.18 g
  •   0.2 g
  •   0.25 g
  •   0.3 g
  •   0.35 g
  •   0.4 g
  •   0.5 g
  •   0.53 g
  •   0.6 g
  •   0.7 g
  •   0.73 g
  •   0.8 g
  •   0.83 g
  •   1 g
  •   1.05 g
  •   1.07 g
  •   1.1 g
  •   1.2 g
  •   1.3 g
  •   1.6 g
  •   2 g
  •   5 g
  •   6.5 g
  •   7.5 g
  •   250 g
  •   100 pcs

2-(Octylthio)ethanol

Item number688692
CAS3547-33-9
FormulaC10H22OS
Molecular weight190,35 g/mol
Quantity 1X25MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
2-(Octylthio)ethanol

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

2-(Octylthio)ethanol

2-(Octylthio)ethanol

688692
3547-33-9

1X25MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 14.03.2025
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:2-(Octylthio)ethanol
Catalog No.:688692
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Serious eye damage (Category 1), H318
Short-term (acute) aquatic hazard (Category 1), H400
Label elements
PictogramGHS05 acid
acid
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
Label elements
Labelling according Regulation (EC) No 1272/2008
Signal word Danger
Hazard statement(s)
H315 Causes skin irritation.
H318 Causes serious eye damage.
H400 Very toxic to aquatic life.
Precautionary statement(s)
P280 Wear eye protection/ face protection.
P305 + P351 + P338 + P310
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing. Immediately call a POISON CENTER/ doctor.
Supplemental Hazard Statements: none
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS
FormulaC10H22OS
Molecular Weight (g/mol)190.35
CAS-No.3547-33-9
FIRST AID MEASURES4.1 Description of first-aid measures
General advice
Consult a physician. Show this material safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Sulfur oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapor or mist.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
EXPOSURE CONTROLS/PERSONAL PROTECTIONExposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance
at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Discharge into the environment must be avoided.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
e) Melting point/freezing point
No data available
f) Initial boiling point and boiling range
283 - 285 °C
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas)
No data available
j) Upper/lower flammability or explosive limits
No data available
k) Vapor pressure 0,000419 hPa at ca.25 °C
l) Vapor density No data available
m) Relative density No data available
n) Water solubility partly soluble
o) Partition coefficient:vn-octanol/water
log Pow: ca.3,64
p) Autoignition temperature
No data available
q) Decomposition temperature
No data available
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
STABILITY AND REACTIVITY10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - No data available
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Sulfur oxides
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 8.530 mg/kg
LD50 Dermal - Rabbit - 13.590 mg/kg
Skin corrosion/irritation
Skin - Rabbit
Result: Irritating to skin.
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
ECOLOGICAL INFORMATION12.1 Toxicity
Toxicity to fish LC50 - Oncorhynchus mykiss (rainbow trout) - 2,9 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates
EC50 - Daphnia magna (Water flea) - 0,37 mg/l - 48 h
EC50 - Daphnia magna (Water flea) - 0,38 mg/l - 48 h
12.2 Persistence and degradability
Biodegradability aerobic - Exposure time 28 d
Result: 99,8 % - Readily biodegradable.
(OECD Test Guideline 301B)
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3082 IMDG: 3082 IATA: 3082
14.2 UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-(Octylthio)ethanol)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-(Octylthio)ethanol)
IATA: Environmentally hazardous substance, liquid, n.o.s. (2-(Octylthio)ethanol)
14.3 Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
14.4 Packaging group
ADR/RID: III IMDG: III IATA: III
14.5 Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This material safety data sheet complies with the
requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!