US Shop

New user? / Forgot your password?

0 Item | 0,00 €

2,4-Dinitrophenylhydrazine

Item number692447
CAS119-26-6
FormulaC6H6N4O4
Molecular weight198,14 g/mol
Quantity 1X5G
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
2,4-Dinitrophenylhydrazine

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

2,4-Dinitrophenylhydrazine

2,4-Dinitrophenylhydrazine

687703
119-26-6

1X100MG

Please log in.

2,4-Dinitrophenylhydrazine

2,4-Dinitrophenylhydrazine

692447
119-26-6

1X5G

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 23.11.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:2,4-Dinitrophenylhydrazine
Catalog No.:692447
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Desensitized explosives (Category 1), H206
Acute toxicity, Oral (Category 4), H302
Label elements
Pictogramflamme
flamme
GHS07 exclam
exclam
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram Signal word Danger
Hazard statement(s)
H206 Fire, blast or projection hazard; increased risk of explosion if
desensitizing agent is reduced.
H302 Harmful if swallowed.
Precautionary statement(s)
P210 Keep away from heat, hot surfaces, sparks, open flames and
other ignition sources. No smoking.
P212 Avoid heating under confinement or reduction of the
desensitizing agent.
P230 Keep wetted with water.
P233 Keep container tightly closed.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection/ hearing protection.
P370 + P380 + P375 In case of fire: Evacuate area. Fight fire remotely due to the
risk of explosion.
P501 Dispose of contents/ container to an approved waste disposal
plant.
Supplemental Hazard information (EU)
EUH044 Risk of explosion if heated under confinement.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
Desensitized explosive
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
EC-No. : 204-309-3
Component Classification Concentration
2,4-Dinitrophenylhydrazine
Expl. 1.1; Acute Tox. 4;
H201, H302
>= 50 - < 70
%
FormulaC6H6N4O4
Molecular Weight (g/mol)198.14
CAS-No.119-26-6
FIRST AID MEASURES4.1 Description of first-aid measures
General advice
Show this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air. In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower.
In case of eye contact
After eye contact: rinse out with plenty of water. Remove contact lenses.
If swallowed
After swallowing: immediately make victim drink water (two glasses at most). Consult a
physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Water Foam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx)
Explosive decomposition possible on heating.
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
5.3 Advice for firefighters
In the event of fire, wear self-contained breathing apparatus.
5.4 Further information
Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire
extinguishing water from contaminating surface water or the ground water system
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact.
Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures,
consult an expert.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid
generation of dusts 6.4 Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE7.1 Precautions for safe handling
Keep away from open flames, hot surfaces and sources of ignition.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Tightly closed and away from sources of ignition and heat. Observe national regulations.
Light sensitive. Store under inert gas.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Ingredients with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
Change contaminated clothing. Preventive skin protection recommended. Wash hands
after working with substance.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Body Protection
protective clothing
Respiratory protection
required when dusts are generated Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odor: Odorless
c) Odor Threshold No data available
d) pH No data available
e) Melting
point/freezing point
Melting point: 194 °C
f) Initial boiling point
and boiling range
No data available
g) Flash point Not applicable
h) Evaporation rate No data available
i) Flammability (solid,
gas)
No data available
j) Upper/lower
flammability or
explosive limits
No data available
k) Vapor pressure No data available
l) Vapor density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient:
n-octanol/water
No data available
p) Autoignition
temperature
No data available
q) Decomposition
temperature >160°C
r) Viscosity No data available
s) Explosive properties Explosive when dry., Risk of explosion if heated under
confinement.
t) Oxidizing properties No data available 9.2 Other safety information
No data available
STABILITY AND REACTIVITY10.1 Reactivity
Risk of explosion if heated under confinement.
The following applies in general to flammable organic substances and mixtures: in
correspondingly fine distribution, when whirled up a dust explosion potential may generally
be assumed.
10.2 Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
Contains the following stabilizer(s):
water (35 %)
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
May be shock-sensitive if dry.
no information available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen
oxides (NOx)
Other decomposition products - No data available
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No ingredient of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available Aspiration hazard
No data available (2,4-Dinitrophenylhydrazine)
Additional Information
RTECS: MV3325000
The absorption of this product into the body may lead to the formation of methaemoglobine
that, in sufficient concentration, causes cyanosis. (2,4-Dinitrophenylhydrazine)
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated. (2,4-Dinitrophenylhydrazine)
ECOLOGICAL INFORMATION12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available (2,4-Dinitrophenylhydrazine)
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3380 IMDG: 3380 IATA: 3380
14.2 UN proper shipping name
ADR/RID: DESENSITIZED EXPLOSIVE, SOLID, N.O.S. (2,4-Dinitrophenylhydrazine)
IMDG: DESENSITIZED EXPLOSIVE, SOLID, N.O.S. (2,4-Dinitrophenylhydrazine)
IATA: Desensitized explosive, solid, n.o.s. (2,4-Dinitrophenylhydrazine)
Passenger Aircraft: Not permitted for transport
Cargo Aircraft: Not permitted for transport
14.3 Transport hazard class(es)
ADR/RID: 4.1 IMDG: 4.1 IATA: 4.1 14.4 Packaging group
ADR/RID: I IMDG: I IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
Other regulations
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or
stricter national regulations where applicable.
Take note of Dir 94/33/EC on the protection of young people at work.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!