Hotline:
+49 (0) 34291 / 33 72 36
contact@hpc-standards.com

US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!

Filter

  • Package Size
  •   1 Unit
  •   2 Units
  •   3 Units
  •   4 Units
  •   7 Units
  •   8 Units
  •   11 Units
  •   100 Units
  •   600 Units
  • Volume
  •   1 mg
  •   2 mg
  •   2.5 mg
  •   2.61 mg
  •   5 mg
  •   10 mg
  •   20 mg
  •   25 mg
  •   50 mg
  •   100 mg
  •   200 mg
  •   250 mg
  •   261 mg
  •   500 mg
  •   1000 mg
  •   5000 mg
  •   0.5 ml
  •   1 ml
  •   5 ml
  •   10 ml
  •   100 ml
  •   500 ml
  •   0.18 g
  •   0.2 g
  •   0.25 g
  •   0.3 g
  •   0.35 g
  •   0.4 g
  •   0.5 g
  •   0.53 g
  •   0.6 g
  •   0.7 g
  •   0.73 g
  •   0.8 g
  •   0.83 g
  •   1 g
  •   1.05 g
  •   1.07 g
  •   1.1 g
  •   1.2 g
  •   1.3 g
  •   1.6 g
  •   2 g
  •   5 g
  •   6.5 g
  •   7.5 g
  •   250 g
  •   100 pcs

1,7-Diaminoheptane

Item number688118
CAS646-19-5
FormulaC7H18N2
Molecular weight130,23 g/mol
Quantity 1X250MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
1,7-Diaminoheptane

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

1,7-Diaminoheptane

1,7-Diaminoheptane

688118
646-19-5

1X250MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 15.01.2025
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:1,7-Diaminoheptane
Catalog No.:688118
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Category 1B), H314
Label elements
PictogramGHS05 acid
acid
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram Signal word Danger Hazard statement(s)
H314 Causes severe skin burns and eye damage.
Precautionary statement(s)
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing.
P310 Immediately call a POISON CENTER/ doctor.
Supplemental Hazard
Statements
none
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Synonyms : 1,7-Heptanediamine
Heptamethylenediamine
Formula : C7H18N2
Molecular weight : 130,23 g/mol
CAS-No. : 646-19-5
EC-No. : 211-468-2
Component Classification Concentration
Heptamethylenediamine
Skin Corr. 1B; Eye Dam.
1; H314, H318
<= 100 %
FormulaC7H18N2
Molecular Weight (g/mol)130.23
CAS-No.646-19-5
FIRST AID MEASURES4.1 Description of first-aid measures
General advice
Consult a physician. Show this material safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of
water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse
mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx)
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or
gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Ingredients with workplace control parameters
8.2 Exposure controls
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety
goggles
Skin protection
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves.
Body Protection
Flame retardant antistatic protective clothing.
Respiratory protection
required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Recommended Filter type: Filter type P2
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Appearance Form: Solidified mass or fragments
Color: colorless
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
e) Melting
point/freezing point
Melting point/range: 26 - 29 °C - lit.
f) Initial boiling point
and boiling range
223 - 225 °C - lit.
g) Flash point 88 °C - closed cup
h) Evaporation rate No data available
i) Flammability (solid,
gas)
No data available
j) Upper/lower
flammability or
explosive limits
No data available
k) Vapor pressure No data available
l) Vapor density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient:
n-octanol/water
No data available
p) Autoignition
temperature
No data available
q) Decomposition
temperature
No data available
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available 9.2 Other safety information
No data available
STABILITY AND REACTIVITY10.1 Reactivity
No data available 10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
acids, Acid chlorides, Acid anhydrides, Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen
oxides (NOx)
Other decomposition products - No data available
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No ingredient of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated
ECOLOGICAL INFORMATION12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or
mix the material with a combustible solvent and burn in a chemical incinerator equipped
with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3259 IMDG: 3259 IATA: 3259
14.2 UN proper shipping name
ADR/RID: POLYAMINES, SOLID, CORROSIVE, N.O.S. (Heptamethylenediamine)
IMDG: POLYAMINES, SOLID, CORROSIVE, N.O.S. (Heptamethylenediamine)
IATA: Polyamines, solid, corrosive, n.o.s. (Heptamethylenediamine)
14.3 Transport hazard class(es)
ADR/RID: 8 IMDG: 8 IATA: 8
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!