Products

Octanoic acid ethyl ester

Item number	689462
CAS	106-32-1
Formula	C10H20O2
Molecular weight	172,26 g/mol
Quantity	1X250MG
storage conditions	20 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS

Price

Please log in.

Product Variations:

Product		Catalog No./ CAS No.	Quantity	Price
Octanoic acid ethyl ester		689462 106-32-1	1X250MG	Please log in.

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 18.11.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	Octanoic acid ethyl ester
Catalog No.:	689462
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com
Emergency telephone number	HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours.
HAZARDS IDENTIFICATION	2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Long-term (chronic) aquatic hazard (Category 2), H411
Label elements
Pictogram	GHS09 Aquatic-pollut-red Aquatic-pollut-red
	2.2 Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal Word none Hazard statement(s) H411 Toxic to aquatic life with long lasting effects. Precautionary statement(s) P273 Avoid release to the environment. P391 Collect spillage. P501 Dispose of contents/ container to an approved waste disposal plant. Supplemental Hazard Statements none Reduced Labeling (<= 125 ml) Pictogram Signal Word none Hazard statement(s) none Precautionary statement(s) none Supplemental Hazard Statements none 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS	3.1 Substances Synonyms : Ethyl caprylate Formula : C10H20O2 Molecular weight : 172,26 g/mol CAS-No. : 106-32-1 EC-No. : 203-385-5 Component Classification Concentration ethyl octanoate CAS-No. EC-No. 106-32-1 203-385-5 Aquatic Chronic 2; H411 <= 100 %
Formula	C10H20O2
Molecular Weight (g/mol)	172.26
CAS-No.	106-32-1
FIRST AID MEASURES	4.1 Description of first-aid measures If inhaled After inhalation: fresh air. In case of skin contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. In case of eye contact After eye contact: rinse out with plenty of water. Remove contact lenses. If swallowed After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available
FIRE-FIGHTING MEASURES	5.1 Extinguishing media Suitable extinguishing media Carbon dioxide (CO2) Foam Dry powder Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given. 5.2 Special hazards arising from the substance or mixture Carbon oxides Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. 5.3 Advice for firefighters In the event of fire, wear self-contained breathing apparatus. 5.4 Further information Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system
ACCIDENTAL RELEASE MEASURES	6.1 Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8 6.2 Environmental precautions Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. 6.4 Reference to other sections For disposal see section 13.
HANDLING AND STORAGE	7.1 Precautions for safe handling Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge. Hygiene measures Change contaminated clothing. Wash hands after working with substance. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Storage conditions Tightly closed. Storage class Storage class (TRGS 510): 10: Combustible liquids 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION	8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,4 mm Break through time: 480 min Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M) This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 30 min Material tested:Butoject® (KCL 898) Respiratory protection Not required; except in case of aerosol formation. Control of environmental exposure Do not let product enter drains
PHYSICAL AND CHEMICAL PROPERTIES	9.1 Information on basic physical and chemical properties a) Physical state clear, liquid b) Color colorless c) Odor No data available d) Melting point/freezing point Freezing point: -44,2 °C - OECD Test Guideline 102 Melting point/range: -47 °C e) Initial boiling point and boiling range 207,2 °C at 1.013 hPa - OECD Test Guideline 103 208 °C at 1.013 hPa f) Flammability (solid, gas) No data available g) Upper/lower flammability or explosive limits No data available h) Flash point 75 °C - closed cup i) Autoignition temperature No data available j) Decomposition temperature No data available k) pH No data available l) Viscosity Viscosity, kinematic: No data available Viscosity, dynamic: No data available m) Water solubility 35,5 g/l at 20 °C - OECD Test Guideline 105 n) Partition coefficient: n-octanol/water log Pow: 4,47 at 22,7 °C - OECD Test Guideline 117 o) Vapor pressure 1,1 hPa at 25 °C - OECD Test Guideline 104 p) Density 0,867 g/cm3 at 20 °C Relative density No data available q) Relative vapor density No data available r) Particle characteristics No data available s) Explosive properties No data available t) Oxidizing properties none 9.2 Other safety information No data available
STABILITY AND REACTIVITY	10.1 Reactivity Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical. 10.2 Chemical stability The product is chemically stable under standard ambient conditions (room temperature) . 10.3 Possibility of hazardous reactions Violent reactions possible with: Oxidizing agents Bases Reducing agents acids 10.4 Conditions to avoid Strong heating. 10.5 Incompatible materials No data available 10.6 Hazardous decomposition products In the event of fire: see section 5
TOXICOLOGICAL INFORMATION	11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - > 5.000 mg/kg Inhalation: No data available LD50 Dermal - Rabbit - > 5.000 mg/kg Skin corrosion/irritation Skin - Human Result: No skin irritation Serious eye damage/eye irritation Eyes - Rabbit Result: Mild eye irritation Respiratory or skin sensitization Patch test on human volunteers did not demonstrate sensitization properties Germ cell mutagenicity No data available Carcinogenicity No data available Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available 11.2 Additional Information Endocrine disrupting properties Product: Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: RH0680000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
ECOLOGICAL INFORMATION	12.1 Toxicity Toxicity to daphnia and other aquatic invertebrates EC50 - Daphnia magna (Water flea) - 7,9 mg/l - 48 h (OECD Test Guideline 202) Toxicity to algae ErC50 - Pseudokirchneriella subcapitata (green algae) - 5,57 mg/l (OECD Test Guideline 201) NOEC - Pseudokirchneriella subcapitata (green algae) - 0,735 mg/l (OECD Test Guideline 201) 12.2 Persistence and degradability Biodegradability aerobic - Exposure time 28 d (OECD Test Guideline 301B) Remarks: Readily biodegradable. 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Endocrine disrupting properties Product: Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. 12.7 Other adverse effects No data available
DISPOSAL CONSIDERATIONS	13.1 Waste treatment methods Product See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
TRANSPORT INFORMATION	14.1 UN number ADR/RID: 3082 IMDG: 3082 IATA: 3082 14.2 UN proper shipping name ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (ethyl octanoate) IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (ethyl octanoate) IATA: Environmentally hazardous substance, liquid, n.o.s. (ethyl octanoate) 14.3 Transport hazard class(es) ADR/RID: 9 IMDG: 9 IATA: 9 14.4 Packaging group ADR/RID: III IMDG: III IATA: III 14.5 Environmental hazards ADR/RID: yes IMDG Marine pollutant: yes IATA: yes 14.6 Special precautions for user Further information EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.
REGULATORY INFORMATION	15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : ENVIRONMENTAL HAZARDS Other regulations Take note of Dir 94/33/EC on the protection of young people at work. 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!