US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Filter

Sudan I

Item number685537
CAS842-07-9
FormulaC16H12N2O
Molecular weight248,28 g/mol
Quantity 1X100MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Sudan I

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

D5-Sudan I

D5-Sudan I

679682
752211-63-5

1X10MG

Please log in.

Sudan I

Sudan I

685537
842-07-9

1X100MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 15.01.2025
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Sudan I
Catalog No.:685537
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
GHS08 health hazard
Muta. 2 H341 Suspected of causing genetic defects.
Carc. 2 H351 Suspected of causing cancer.
GHS07
Skin Sens. 1 H317 May cause an allergic skin reaction.
Aquatic Chronic 4 H413 May cause long lasting harmful effects to aquatic life.
Label elements
PictogramGHS07 exclam
exclam
GHS08 silhouete
silhouete
2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
· Signal word Warning
· Hazard statements
H317 May cause an allergic skin reaction.
H341 Suspected of causing genetic defects.
H351 Suspected of causing cancer.
H413 May cause long lasting harmful effects to aquatic life.
· Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Chemical characterisation: Substances
· CAS No. Description
842-07-9 1-phenylazo-2-naphthol
· Identification number(s) None
· EC number: 212-668-2
· Index number: 611-056-00-6
· RTECS: QL 4900000
FormulaC16H12N2O
Molecular Weight (g/mol)248.28
CAS-No.842-07-9
FIRST AID MEASURES4.1 Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation:
Supply fresh air and call a doctor.
In case of unconsciousness place patient in recovery position for transport.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water.
· After swallowing: Rinse mouth. Do not induce vomiting.
4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
FIRE-FIGHTING MEASURES5.1 Extinguishing media
· Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.
5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
5.3 Advice for firefighters
· Protective equipment: Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.
6.2 Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
6.3 Methods and material for containment and cleaning up:
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
HANDLING AND STORAGE7.1 Precautions for safe handling
Ensure good ventilation/extraction at the workplace.
Store in cool, dry place in tightly closed receptacles.
Open and handle receptacle with care.
· Information about fire - and explosion protection: Keep respiratory protective device available.
7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle unless other advice is given on the CoA.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions: Keep container tightly sealed.
7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTIONAdditional information about design of technical facilities: No further data; see item 7.
8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace: Not required.
· Additional information: Lists used were valid at the time of SDS preparation.
8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374
Protective gloves
· Material of gloves Butyl rubber, BR
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Solid
Colour: Red
· Odour: Odourless
· Odour threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/freezing point: 134 °C
Initial boiling point and boiling range: Not determined.
· Flash point: Not applicable.
· Flammability (solid, gas): Not determined.
· Ignition temperature: Not determined
· Decomposition temperature: Not determined.
· Auto-ignition temperature: Not determined.
· Explosive properties: Not determined.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure: Not applicable.
· Density: Not determined.
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water: Insoluble.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY10.1 Reactivity Stable under normal conditions.
10.2 Chemical stability Stable under normal conditions.
· Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
10.3 Possibility of hazardous reactions No dangerous reactions known.
10.4 Conditions to avoid Heat.
10.5 Incompatible materials: Strong oxidizing agents.
10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
· Acute toxicity Based on available data, the classification criteria are not met.
· Primary irritant effect:
· Skin corrosion/irritation Based on available data, the classification criteria are not met.
· Serious eye damage/irritation Based on available data, the classification criteria are not met.
· Respiratory or skin sensitisation
May cause an allergic skin reaction.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
Muta. 2, Carc. 2
· Germ cell mutagenicity
Suspected of causing genetic defects.
· Carcinogenicity
Suspected of causing cancer.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
12.2 Persistence and degradability No further relevant information available.
12.3 Bioaccumulative potential No further relevant information available.
12.4 Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes:
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
· Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
· Uncleaned packaging:
· Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION14.1 UN-Number
· ADR, ADN, IMDG, IATA Not applicable
· ADR, ADN, IMDG, IATA Not applicable
14.3 Transport hazard class(es)
· ADR, ADN, IMDG, IATA
· Class Not applicable
14.4 Packing group
· ADR, IMDG, IATA Not applicable
14.5 Environmental hazards: Not applicable.
14.6 Special precautions for user Not applicable.
14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· UN "Model Regulation": Not applicable
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I Substance is not listed.
15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!